[Emerald] SOLVED: Overlimit Field: Use .167++

Jeff Woods ( jwoods@delta.com )
Sat, 15 May 1999 10:26:48 -0400

From the 2.5.175 release notes:

RadiusNT 2.5 Updates and Changes

v2.5.167 - 3/15/99

* Strip Username when used with Treat as local was not removing the
domain from the user request.

* The Overlimit/Balance was comparing the values opposite of what they
should have.


Sounds like .167 is the minimum needed. I'll try .175 (just downloaded)
before sending this message.

Bingo. .162 does NOT honor overlimit. You need .167 or better in order
to use the OverLimit features.

At 02:41 PM 5/14/99 -0700, you wrote:
>Jeff Woods wrote:
> >
> > Dale, I am using RadiusNT 2.5.162 (just reverified that), and OverLimit is
> > not working in conjunction with Emerald 2.5.278. It lets users on that
> > should not be let on due to overlimit exceptions.
>Try 175 and let me know if it doesn't work either. I don't think
>charge with respect to that, but I didn't verify 175 was working here.
>I'll try to dig a 162 as well to test.
>Dale E. Reed Jr. Emerald and RadiusNT
>IEA Software, Inc. www.iea-software.com