This Message was undeliverable due to the following reason:
A message was not delivered because a loop was found in the Mail
eXchanger (MX) record database. The destination host has an MX
record that points to this host, but there is no account for the
recipient.
Here are a few possible solutions for clearing up this problem:
- return the mail since the address was invalid
- fix the MX records in the DNS for the host in question
and then resubmit the message
- add an account or alias for the recipient on this machine
and then resubmit the message
If this machine should be handling all mail for the destination
host, it should be added to the list of Local-Mail-Domains in
the "System Configuration."
Destination host: allgaeu.net
The following recipients did not receive this message:
<beck@allgaeu.net>
Please reply to Postmaster@ns.allgaeu.net
if you feel this message to be in error.
--===========================_ _= 5030517(23518)
Content-Type: message/delivery-status
Content-Disposition: inline
Content-Transfer-Encoding: 7bit
Reporting-MTA: dns; ns.allgaeu.net
Received-From-MTA: dns; [207.53.165.8] [207.53.165.8]
Arrival-Date: Mon, 14 Sep 1998 23:49:55 +0200
--===========================_ _= 5030517(23518)
Content-Type: message/rfc822
Content-Disposition: inline
Content-Transfer-Encoding: 7bit
Received: from walnut.iea-software.com ([207.53.165.8]) by ns.allgaeu.net
(Netscape Messaging Server 3.5) with ESMTP id AAAE15
for <beck@allgaeu.net> Mon, 14 Sep 1998 23:49:55 +0200
Received: from walnut.iea-software.com (walnut.iea-software.com [207.53.165.8]) by walnut.iea-software.com (NTMail 4.00.0020/NT6651.00.c89adb95) with ESMTP id za000568 for <radiusnt@iea-software.com> Mon, 14 Sep 1998 14:28:22 +0100
Received: from [207.53.165.2] by walnut.iea-software.com (NTMail 4.00.0020/NT6651.00.c89adb95) with ESMTP id segaaaaa for <radiusnt@iea-software.com> Mon, 14 Sep 1998 14:28:22 +0100
Received: from twister.emerald.iea.com (unverified [198.17.249.19]) by pine.iea-software.com
(Rockliffe SMTPRA 2.1.5) with SMTP id <B0128220027@pine.iea-software.com> for <radiusnt@iea-software.com>
Mon, 14 Sep 1998 14:38:55 -0700
Received: from walnut.iea-software.com (walnut.iea-software.com [207.53.165.8]) by twister.emerald.iea.com (NTMail 3.03.0016/1.agp1) with ESMTP id ya352220 for <radiusnt@iea-software.com> Mon, 14 Sep 1998 14:33:22 -0700
Received: from [207.53.165.21] by walnut.iea-software.com (NTMail 4.00.0020/NT6651.00.c89adb95) with ESMTP id regaaaaa for <radiusnt@emerald.iea.com> Mon, 14 Sep 1998 14:27:48 +0100
Message-ID: <35F1AE19.F7F88076@iea-software.com>
Date: Sat, 05 Sep 1998 14:33:14 -0700
From: "Dale E. Reed Jr." <daler@iea-software.com>
Organization: IEA Software, Inc.
X-Mailer: Mozilla 4.06 [en] (WinNT; I)
MIME-Version: 1.0
To: Ioannis Chazakis <ioannis@acropolis.net>
CC: radiusnt@emerald.iea.com
Subject: Re: assigning different ips for the same user depending on the port he connects
References: <01bddfed$1f205de0$0a40c8c3@littledevil.ath-farm.acropolis.net>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Ioannis Chazakis wrote:
>
> Hi, i'm a new member to this list.
> I've started evaluating the radius server and i've already got a question !
>
> i am allowing demo users to dialin and check out my system.
> I would like to :
> a) limit their logins to a maximum of 5
> b) assign to each one of them a different ip address depending on the
> port they connect, i.e. username demo, nas port 1, ip address 10.0.0.1
> username demo,nas port 2, ip address 10.0.0.2 etc
>
> i tried using both text and odbc authentication with the following users
> file :
>
> ......
> .....
> demo Password = "demo", Nas-Port = 1
> User-Service = Framed-User,
> Framed-Protocol = PPP,
> Framed-Address = 10.0.0.1,
> Framed-Netmask = 255.255.255.0,
> Framed-Routing = None
>
> demo Password = "demo", Nas-Port = 2
> User-Service = Framed-User,
> Framed-Protocol = PPP,
> Framed-Address = 10.0.0.2,
> Framed-Netmask = 255.255.255.0,
> Framed-Routing = None
>
> so that user demo at port 1 gets ip 10.0.0.1 and user demo at port 2 gets ip
> 10.0.0.2
> I then dial into port 1 and get the correct ip address. When I dial into
> port 2, i get disconnected and from what i figured out, only the first demo
> entry in the text file is checked which has a nas-port = 1 so I get
> disconnected.
> Is there any way to accomplish what I am trying to do?
Unfortunately, there isn't. RadiusNT currently doesn't support the
syntax that you are looking for. Once it find a matching username, it
does not continue looking for another if that one doesn't work.
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com--===========================_ _= 5030517(23518)--