Mail System Error - Returned Mail

Mail Administrato ( Postmaster@sneezy.bworldonline.com )
Tue, 15 Sep 1998 02:46:11 -0800

--===========================_ _= 3834228(29952)
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

This Message was undeliverable due to the following reason:

A message was not delivered because it would create a mail loop.

The addresses below do not belong to any accounts on this machine,
so an attempt was made to forward the message to the destination
host. However, the destination host is THIS machine, but under
a different name.

Here are a few possible solutions for clearing up this problem:

- return the mail since the address was invalid

- add an account or alias for the recipient and
resubmit the message

If this machine should be handling all mail for the destination
host, it should be added to the list of Local-Mail-Domains in
the "system" configuration.

Destination host: mail.bworldonline.com

The following recipients did not receive this message:

<ren@mail.bworldonline.com>

Please reply to Postmaster@sneezy.bworldonline.com
if you feel this message to be in error.

--===========================_ _= 3834228(29952)
Content-Type: message/delivery-status
Content-Disposition: inline
Content-Transfer-Encoding: 7bit

Reporting-MTA: dns; sneezy.bworldonline.com
Received-From-MTA: dns; [207.53.165.8] [207.53.165.8]
Arrival-Date: Sun, 13 Sep 1998 02:26:20 -0800

--===========================_ _= 3834228(29952)
Content-Type: message/rfc822
Content-Disposition: inline
Content-Transfer-Encoding: 7bit

Received: from walnut.iea-software.com ([207.53.165.8])
by sneezy.bworldonline.com (Netscape Messaging Server 3.0)
with ESMTP id AAA2623 for <nats@bworld.com.ph>
Sun, 13 Sep 1998 02:26:20 -0800
Received: from walnut.iea-software.com (walnut.iea-software.com [207.53.165.8]) by walnut.iea-software.com (NTMail 4.00.0020/NT6651.00.c89adb95) with ESMTP id za000522 for <radiusnt@iea-software.com> Sat, 12 Sep 1998 11:18:56 +0100
Received: from [207.53.173.27] by walnut.iea-software.com (NTMail 4.00.0020/NT6651.00.c89adb95) with ESMTP id akfaaaaa for <radiusnt@iea-software.com> Sat, 12 Sep 1998 11:18:53 +0100
Message-ID: <35EEDECD.5F19126@iea-software.com>
Date: Thu, 03 Sep 1998 11:24:13 -0700
From: "Dale E. Reed Jr." <daler@iea-software.com>
Organization: IEA Software, Inc.
X-Mailer: Mozilla 4.06 [en] (WinNT; I)
MIME-Version: 1.0
To: amwansa@pop3.zamnet.zm
CC: radiusnt@iea-software.com
Subject: Re: Authentication / Calls table
References: <35FA5DDC.3EC56ADD@zamnet.zm>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Annabel Mwansa wrote:
>
> Radius is authenticating but the calls table is not being updated. I've
> included some information from the account and authentication logs. Can
> anyone help?
>
> The Accounting log
>
> ODBC Error:37000:264:
> [Microsoft][ODBC SQL Server Driver][SQL Server]Column name
> NASIdentifier appears more than once in the result column list.

Go into your Database and change AttributeID #32 from NAS-Identifier
to NAS-ID2 in the RadAttributes table and restart RadiusNT. It
should then start recording the data.

> Resp Time: 30 Auth: 68/15 -> 51 Acct: 0/6702/0 -> 6702
> radrecv: Request from host d0e0b006 code=4, id=102, length=247
> Acct-Session-Id = "0f00008a"
> User-Name = "aesl"
> NAS-Identifier = 208.224.176.6
> NAS-Port = 1
> Acct-Status-Type = Stop
> Acct-Session-Time = 250
> Acct-Terminate-Cause = User-Request
> Acct-Authentic = RADIUS
> NAS-Identifier = "usr1-lk"
> Acct-Input-Octets = 2305
> Acct-Output-Octets = 242
> Acct-Input-Packets = 27
> Acct-Output-Packets = 0
> NAS-Port-Type = Async
> User-Service = Framed-User
> Framed-Protocol = PPP
> Framed-Address = 196.7.240.136
> Acct-Delay-Time = 0
> ODBC Error:37000:264:
> [Microsoft][ODBC SQL Server Driver][SQL Server]Column name
> NASIdentifier appears more than once in the result column list.
>
> Authentication log
>
> Resp Time: 60 Auth: 36/1 -> 19 Acct: 7/1/0 -> 8
> radrecv: Request from host d0e0b006 code=1, id=154, length=196
> User-Name = "ermmofed"
> Challenge-Response =
> "\001\257\027-\355V\223\376\317\213V\303\033<!\215M"
> NAS-IP-Address = 208.224.176.6
> NAS-Port = 16
> User-Service = Framed-User
> Framed-Protocol = PPP
> NAS-Identifier = "usr1-lk"
> Acct-Session-Id = "03030001"
> NAS-Port-Type = Async
> Checking user record PW_PASSWORD type
> authChapPwd
> Sending Ack of id 154 to d0e0b006 (208.224.176.6)
> User-Service = Framed-User
> Framed-Protocol = PPP
> Framed-Address = 255.255.255.254
> Framed-Netmask = 255.255.255.255
> Framed-Routing = None
> Framed-Compression = 0
> Framed-Filter = "dialin"
> Framed-MTU = 1006
>
> Resp Time: 20 Auth: 38/1 -> 20 Acct: 7/1/0 -> 8
> radrecv: Request from host d0e0b006 code=4, id=155, length=215
> Acct-Session-Id = "03030001"
> User-Name = "ermmofed"
> NAS-IP-Address = 208.224.176.6
> NAS-Port = 16
> Acct-Status-Type = Start
> Acct-Authentic = RADIUS
> NAS-Identifier = "usr1-lk"
> NAS-Port-Type = Async
> User-Service = Framed-User
> Framed-Protocol = PPP
> Framed-Address = 208.224.178.43
> Acct-Delay-Time = 0
> Sending Accounting Ack of id 155 to d0e0b006 (208.224.176.6)
>
> Resp Time: 50 Auth: 38/1 -> 20 Acct: 8/1/0 -> 9
> radrecv: Request from host d0e0b006 code=4, id=156, length=249
> Acct-Session-Id = "0f0000db"
> User-Name = "lilayi"
> NAS-IP-Address = 208.224.176.6
> NAS-Port = 1
> Acct-Status-Type = Stop
> Acct-Session-Time = 1852
> Acct-Terminate-Cause = 1
> Acct-Authentic = RADIUS
> NAS-Identifier = "usr1-lk"
> Acct-Input-Octets = 85146
> Acct-Output-Octets = 1554952
> Acct-Input-Packets = 2535
> Acct-Output-Packets = 2611
> NAS-Port-Type = Async
> User-Service = Framed-User
> Framed-Protocol = PPP
> Framed-Address = 208.224.178.42
> Acct-Delay-Time = 0

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com--===========================_ _= 3834228(29952)--