i am allowing demo users to dialin and check out my system.
I would like to :
a) limit their logins to a maximum of 5
b) assign to each one of them a different ip address depending on the
port they connect, i.e. username demo, nas port 1, ip address 10.0.0.1
username demo,nas port 2, ip address 10.0.0.2 etc
i tried using both text and odbc authentication with the following users
file :
.......
......
demo Password = "demo", Nas-Port = 1
User-Service = Framed-User,
Framed-Protocol = PPP,
Framed-Address = 10.0.0.1,
Framed-Netmask = 255.255.255.0,
Framed-Routing = None
demo Password = "demo", Nas-Port = 2
User-Service = Framed-User,
Framed-Protocol = PPP,
Framed-Address = 10.0.0.2,
Framed-Netmask = 255.255.255.0,
Framed-Routing = None
so that user demo at port 1 gets ip 10.0.0.1 and user demo at port 2 gets ip
10.0.0.2
I then dial into port 1 and get the correct ip address. When I dial into
port 2, i get disconnected and from what i figured out, only the first demo
entry in the text file is checked which has a nas-port = 1 so I get
disconnected.
Is there any way to accomplish what I am trying to do?
Thanks
ioannis@acropolis.net
while(!asleep()) lambs++;