I'll read all the documentation before I ask any more stupid questions <sigh>.
Thanks for your support....
At 09:32 8/07/98 +1000, you wrote:
>At 13:25 7/07/98 -0700, you wrote:
>>Glen Harvy wrote:
>>>
>>> I have Radius 2.5 Authentication working fine however Accounting isn't.
>>>
>>> When I access the record for my "test" user, no details of his connections
>>> are recorded. The User-on-line doesn't work either.
>>
>>The problem is that it is trying to match the NASIdentifier attribute
>>with the IP Address you specified in the servers table. However, the
>>NAS-Identifier shown below isn't an IP Address. One way to work around
>>this is to add a second server in the Emerald Admin with an IP address
>>of "comserv2". Then things should start appearing.
>>
>
>OK. I did that and now the "Calls On-Line" works but that's all. Details of
>the login are not showing in the users details section. Here's an excerpt
>from the accounting log:-
>
>radrecv: Request from host cb3a192e code=4, id=10, length=139
> Acct-Status-Type = Start
> Acct-Session-Id = "35A2AD7635"
> Acct-Delay-Time = 0
> User-Name = "terry"
> NAS-Identifier = "comserv2"
> NAS-Port = 3
> NAS-Port-Type = Async
> User-Service = Framed-User
> Framed-Protocol = PPP
> Framed-Address = 203.58.25.47
> Framed-Routing = Broadcast-Listen
> Framed-MTU = 1500
> Framed-Compression = Van-Jacobsen-TCP-IP
> Framed-Compression = 2
> Framed-IPX-Network = 0
> Framed-AppleTalk-Network = 0
> Idle-Timeout = 600
> Session-Timeout = 0
>
> SQL Statement: INSERT INTO Calls
>(CallDate,AcctStatusType,AcctSessionId,AcctDelayTime,UserName,NASIdentifier,
>NASPort,NASPortType,UserService,FramedProtocol,FramedAddress) VALUES
>(GetDate(),1,'35A2AD7635',0,'terry','comserv2',3,0,2,1,'203.58.25.47')
>
>Sending Accounting Ack of id 10 to cb3a192e (comserv2)
>
>Resp Time: 40 Auth: 1/1 -> 2 Acct: 1/0/0 -> 1
>radrecv: Request from host cb3a192e code=4, id=11, length=103
> Acct-Status-Type = Stop
> Acct-Session-Id = "35A2AD7635"
> Acct-Delay-Time = 0
> User-Name = "terry"
> NAS-Identifier = "comserv2"
> NAS-Port = 3
> Acct-Input-Octets = 2388
> Acct-Output-Octets = 7312
> Acct-Input-Packets = 22
> Acct-Output-Packets = 49
> Acct-Session-Time = 120
> Acct-Terminate-Cause = 0
>
> SQL Statement: INSERT INTO Calls
>(CallDate,AcctStatusType,AcctSessionId,AcctDelayTime,UserName,NASIdentifier,
>NASPort,AcctInputOctets,AcctOutputOctets,AcctSessionTime,AcctTerminateCause)
> VALUES (GetDate(),2,'35A2AD7635',0,'terry','comserv2',3,2388,7312,120,0)
>
>Sending Accounting Ack of id 11 to cb3a192e (comserv2)
>
>Resp Time: 20 Auth: 1/1 -> 2 Acct: 2/0/0 -> 2
>
>
>Glen.
>--------------------------------------------------------------------
>AQUARIUS Communications for all your Internet<>Fidonet needs
><>Full ISP services<>FrontDoor Commercial<>TransX Internet/FTSC Mailer
>voice(02)9977-3788<>fax(02)9977-3844<>bbs(02)9977-2855<>3:714/930
>http://www.aquarius.com.au <> mailto:sales@aquarius.com.au
>
>
Glen.
--------------------------------------------------------------------
AQUARIUS Communications for all your Internet<>Fidonet needs
<>Full ISP services<>FrontDoor Commercial<>TransX Internet/FTSC Mailer
voice(02)9977-3788<>fax(02)9977-3844<>bbs(02)9977-2855<>3:714/930
http://www.aquarius.com.au <> mailto:sales@aquarius.com.au