Re: Emerald Accounting

Glen Harvy ( root@aquarius.com.au )
Wed, 08 Jul 1998 09:32:34 +1000

At 13:25 7/07/98 -0700, you wrote:
>Glen Harvy wrote:
>>
>> I have Radius 2.5 Authentication working fine however Accounting isn't.
>>
>> When I access the record for my "test" user, no details of his connections
>> are recorded. The User-on-line doesn't work either.
>
>The problem is that it is trying to match the NASIdentifier attribute
>with the IP Address you specified in the servers table. However, the
>NAS-Identifier shown below isn't an IP Address. One way to work around
>this is to add a second server in the Emerald Admin with an IP address
>of "comserv2". Then things should start appearing.
>

OK. I did that and now the "Calls On-Line" works but that's all. Details of
the login are not showing in the users details section. Here's an excerpt
from the accounting log:-

radrecv: Request from host cb3a192e code=4, id=10, length=139
Acct-Status-Type = Start
Acct-Session-Id = "35A2AD7635"
Acct-Delay-Time = 0
User-Name = "terry"
NAS-Identifier = "comserv2"
NAS-Port = 3
NAS-Port-Type = Async
User-Service = Framed-User
Framed-Protocol = PPP
Framed-Address = 203.58.25.47
Framed-Routing = Broadcast-Listen
Framed-MTU = 1500
Framed-Compression = Van-Jacobsen-TCP-IP
Framed-Compression = 2
Framed-IPX-Network = 0
Framed-AppleTalk-Network = 0
Idle-Timeout = 600
Session-Timeout = 0

SQL Statement: INSERT INTO Calls
(CallDate,AcctStatusType,AcctSessionId,AcctDelayTime,UserName,NASIdentifier,
NASPort,NASPortType,UserService,FramedProtocol,FramedAddress) VALUES
(GetDate(),1,'35A2AD7635',0,'terry','comserv2',3,0,2,1,'203.58.25.47')

Sending Accounting Ack of id 10 to cb3a192e (comserv2)

Resp Time: 40 Auth: 1/1 -> 2 Acct: 1/0/0 -> 1
radrecv: Request from host cb3a192e code=4, id=11, length=103
Acct-Status-Type = Stop
Acct-Session-Id = "35A2AD7635"
Acct-Delay-Time = 0
User-Name = "terry"
NAS-Identifier = "comserv2"
NAS-Port = 3
Acct-Input-Octets = 2388
Acct-Output-Octets = 7312
Acct-Input-Packets = 22
Acct-Output-Packets = 49
Acct-Session-Time = 120
Acct-Terminate-Cause = 0

SQL Statement: INSERT INTO Calls
(CallDate,AcctStatusType,AcctSessionId,AcctDelayTime,UserName,NASIdentifier,
NASPort,AcctInputOctets,AcctOutputOctets,AcctSessionTime,AcctTerminateCause)
VALUES (GetDate(),2,'35A2AD7635',0,'terry','comserv2',3,2388,7312,120,0)

Sending Accounting Ack of id 11 to cb3a192e (comserv2)

Resp Time: 20 Auth: 1/1 -> 2 Acct: 2/0/0 -> 2

Glen.
--------------------------------------------------------------------
AQUARIUS Communications for all your Internet<>Fidonet needs
<>Full ISP services<>FrontDoor Commercial<>TransX Internet/FTSC Mailer
voice(02)9977-3788<>fax(02)9977-3844<>bbs(02)9977-2855<>3:714/930
http://www.aquarius.com.au <> mailto:sales@aquarius.com.au