Message 2: RE: USR Upagrde problem
from Chris Thomas <ChrisT@mbcom.com.au>
Message 3: RE: USR Upgrade problem
from "Paul Smith" <pjsmith@microtech.co.gg>
Message 4: Re: USR Upgrade problem
from "2Day Internet" <peter@2day.net.nz>
Message 5: RE: USR Upgrade problem
from Chris Thomas <ChrisT@mbcom.com.au>
Message 6: StartTime and StopTime not functioning
from "Mauro J. Jaskelioff" <mauro@citynet.net.ar>
Message 7: Problem with start Radius.exe
from "tech" <tech@gsig-net.qc.ca>
Message 8: OK, any online docs on populating serverports table?
from "Jason Chimney" <jason@cnx.net>
Message 9: RE: *reload*
from "greg Lowthian" <greg@isat.com>
Message 10: IPAD server problem
from "James B. Hrdy" <jhrdy@greensoft.com>
Message 11: Login with E-Mail address
from "greg Lowthian" <greg@isat.com>
Message 12: Emerald Accounting
from Glen Harvy <root@aquarius.com.au>
Message 13: Calls table primary key
from "2Day Internet" <peter@2day.net.nz>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: USR Upagrde problem
From: "2Day Internet" <peter@2day.net.nz>
Date: Mon, 6 Jul 1998 19:32:44 +1200
>This could be an issue with IP Addresses. Using the latest RadiusNT,
>go into the Admin and choose your primary IP address from the list.
>Does the USR have any kind of debug to see what the issue is? It
>looks like RadiusNT is working fine.
Progress, have 3Com engineer on phone.. I have it authenticating (more on
this later)
Back to accounting issue. The Netserver is sending AcctSessionID of
username-xxxx every time.
i.e. Its a long string which is not incrementing. Surely this is not right?
SQL server wont insert the record due to a primary key constraint.
First call gets logged then forget the rest.
Does 3COM read RFC's?
regards
Peter Mott
Chief Enthusiast
2Day Internet Limited.
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 2 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: RE: USR Upagrde problem
From: Chris Thomas <ChrisT@mbcom.com.au>
Date: Mon, 6 Jul 1998 15:46:17 +0800
> -----Original Message-----
> From: 2Day Internet [mailto:peter@2day.net.nz]
> Sent: Monday, 6 July 1998 15:33
> To: radiusnt@iea-software.com
> Subject: Re: USR Upagrde problem
>
>
> >This could be an issue with IP Addresses. Using the latest RadiusNT,
> >go into the Admin and choose your primary IP address from the list.
> >Does the USR have any kind of debug to see what the issue is? It
> >looks like RadiusNT is working fine.
>
> Progress, have 3Com engineer on phone.. I have it
> authenticating (more on
> this later)
>
> Back to accounting issue. The Netserver is sending AcctSessionID of
> username-xxxx every time.
>
> i.e. Its a long string which is not incrementing. Surely
> this is not right?
> SQL server wont insert the record due to a primary key constraint.
This is what we saw as well. When I spoke with 3Com techs, they were
suprised and said that they didn't think it followed RFC, but it seems
that that is the way it's done in NS Plus. We increased the SQL record
size for that field and the problem was solved.
> First call gets logged then forget the rest.
>
> Does 3COM read RFC's?
Not in this case it seems.
Chris
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 3 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: RE: USR Upgrade problem
From: "Paul Smith" <pjsmith@microtech.co.gg>
Date: Mon, 6 Jul 1998 08:46:43 +0100
We had lot of problem like this. Worst of all the Box would intermittently
stop answering calls. We tried this upgrade on 4 different boxes under
3coms guidance. Every time there were BIG problems afterwards.
To anyone contemplating upgrade to V4... Don't!
-----Original Message-----
From: radiusnt-request@iea-software.com
[mailto:radiusnt-request@iea-software.com]On Behalf Of 2Day Internet
Sent: 06 July 1998 06:57
To: radiusnt@iea-software.com
Subject: Re: USR Upagrde problem
>exist. RadiusNT 2.5.124 and higher default to allowing the 0 length
>malformed packet problem. The others it still doesn't allow. If you
>use "radius -x15 -X" in the foreground, RadiusNT will dump the packet.
>If you send that dump to me, I'll tell you why the packet is
>malformed.
Malformed packet problem gone away now...
Sorry, bad hair day. I should *never* have believed 3Com when they said to
upgrade firmware on Netserver from v3.2.5.3 to v4.1.7
I am happy RadiusNT is performing ok, so my bleating is inappropriate for
this list. If there are any Netserver saavy people subscribed I would
appreciate a private email. I have been off the air for 8 hours now, any
any clues would be appreciated.
NAS no longer authenticates using Radius but ok with local. I see radius
debug of
Sending Ack of id 7 to cb621a82 (akl-netserv1.2day.net.nz)
User-Service = Framed-User
Framed-Protocol = PPP
Framed-Compression = Van-Jacobsen-TCP-IP
Resp Time: 491 Auth 2/0 -> 2 Acct: 0/0/0 -> 0
Win95 client gets error "Dailup networking could not negotiate a compatible
set of network protocols ..."
It also appears the NAS wont accept framed-address settings for specified IP
addresses on other user profiles (just as serious problem!)
regards
Peter Mott
Chief Enthusiast
2Day Internet Limited.
QUIT
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 4 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: USR Upgrade problem
From: "2Day Internet" <peter@2day.net.nz>
Date: Mon, 6 Jul 1998 20:01:38 +1200
To my fellow victims of 3Com stupidity..
>We had lot of problem like this. Worst of all the Box would intermittently
>stop answering calls. We tried this upgrade on 4 different boxes under
>3coms guidance. Every time there were BIG problems afterwards.
Have just given up trying to talk to Hong Kong service engineer (he was my
last hope for help in this part of the world - esculated to US now!)
Following are required it you want Netserver to allocate an IP address from
its pool.
Framed-IP-Address 255.255.255.254
Framed-IP-Netmask 255.255.255.255
I didnt have them (not needed in v3.2.5.3)
My big problem now is that if I specify a static IP address for a particular
account (something within my class c network) Netserver logs this to
console..
Facility "IP", Level "Critical":: User xxxx is configured for an existing IP
network address
Anybody know why it might be saying this?
I have users that *must* have a static IP address by tomorrow or I am dead
in the water!
regards
Peter Mott
Chief Enthusiast
2Day Internet Limited.
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 5 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: RE: USR Upgrade problem
From: Chris Thomas <ChrisT@mbcom.com.au>
Date: Mon, 6 Jul 1998 16:19:09 +0800
I have to agree. We've just finished 6 months of problems with Netserver
Plus. We've given up and gone to the faultless TCH's for all our POPs.
If I was forced to stay with Netserver, I would be going back to V3.x to
save the problems.
Chris
> -----Original Message-----
> From: Paul Smith [mailto:pjsmith@microtech.co.gg]
> Sent: Monday, 6 July 1998 15:47
> To: radiusnt@iea-software.com
> Subject: RE: USR Upgrade problem
>
>
> We had lot of problem like this. Worst of all the Box would
> intermittently
> stop answering calls. We tried this upgrade on 4 different
> boxes under
> 3coms guidance. Every time there were BIG problems afterwards.
>
> To anyone contemplating upgrade to V4... Don't!
>
> -----Original Message-----
> From: radiusnt-request@iea-software.com
> [mailto:radiusnt-request@iea-software.com]On Behalf Of 2Day Internet
> Sent: 06 July 1998 06:57
> To: radiusnt@iea-software.com
> Subject: Re: USR Upagrde problem
>
>
> >exist. RadiusNT 2.5.124 and higher default to allowing the 0 length
> >malformed packet problem. The others it still doesn't allow. If you
> >use "radius -x15 -X" in the foreground, RadiusNT will dump
> the packet.
> >If you send that dump to me, I'll tell you why the packet is
> >malformed.
>
> Malformed packet problem gone away now...
>
> Sorry, bad hair day. I should *never* have believed 3Com
> when they said to
> upgrade firmware on Netserver from v3.2.5.3 to v4.1.7
>
> I am happy RadiusNT is performing ok, so my bleating is
> inappropriate for
> this list. If there are any Netserver saavy people subscribed I would
> appreciate a private email. I have been off the air for 8
> hours now, any
> any clues would be appreciated.
>
> NAS no longer authenticates using Radius but ok with local.
> I see radius
> debug of
>
> Sending Ack of id 7 to cb621a82 (akl-netserv1.2day.net.nz)
>
> User-Service = Framed-User
> Framed-Protocol = PPP
> Framed-Compression = Van-Jacobsen-TCP-IP
>
> Resp Time: 491 Auth 2/0 -> 2 Acct: 0/0/0 -> 0
>
> Win95 client gets error "Dailup networking could not
> negotiate a compatible
> set of network protocols ..."
>
> It also appears the NAS wont accept framed-address settings
> for specified IP
> addresses on other user profiles (just as serious problem!)
>
> regards
>
> Peter Mott
> Chief Enthusiast
> 2Day Internet Limited.
>
>
>
>
> QUIT
>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 6 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: StartTime and StopTime not functioning
From: "Mauro J. Jaskelioff" <mauro@citynet.net.ar>
Date: Mon, 06 Jul 1998 09:34:01
I can't get the StartTime and StopTime to work. In -x15 mode I can see
Radius using the RadCheckPort Procedure, but radius seems to ignore the
startime and stoptime fields.
Example:
I wan't to limit from 6AM to 6PM
StartTime-------- 120
StopTime----------1080
CurrentTime-------686
But the user is allowed to login.
What I am doing wrong?
************************
* Mauro J. Jaskelioff *
* mauro@citynet.net.ar *
* Depto T=E9cnico *
* Citynet S.A. *
************************
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 7 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Problem with start Radius.exe
From: "tech" <tech@gsig-net.qc.ca>
Date: Mon, 6 Jul 1998 14:54:31 -0400
This is a multi-part message in MIME format.
------=_NextPart_000_0016_01BDA8ED.FBAA4F00
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hello! I install radiusNT program with Access program, when i start the =
radiusNt service i have a Dr.Watson error: An application error has =
occurred and an application error log is being generated. Radius.exe =
Exception: access violation (0xc0000005), Address: 0x77f6cc66.
And a message with services is Could not start the RadiusNt service on =
my server. Error 1067: The process terminated unexpectedly.
In DOS mode radiusNT is correct, but the CallsOnline, Calls is not =
fonctionnal. Radlogs is OK.
Tech@gsig-net.qc.ca
------=_NextPart_000_0016_01BDA8ED.FBAA4F00
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">