Framed Address

Paul W. Wilcox ( (no email) )
Tue, 16 Jun 1998 17:14:18 +1000

I know this question has been asked plenty of times, but I can't seem to get
it to work, I need to give a permanently connected user a fixed IP address.
I have gone into radconfig and set-up the account id, attribute (8), and ip
address, and when I do a radlogin it comes back with the right IP address
(203.22.207.252). However when the actual dial-in happens I get the
following;

SQL Statement: Select ra.RadAttributeID, Name, Data, Value, Type From
RadConfig
rc, RadAttributes ra Where ra.RadAttributeID=rc.RadAttributeID AND
rc.AccountI
=768

User-Service = Framed User (2)
Framed-Protocol = PPP (1)
Framed-Address = 203.22.207.252 (1)
Framed-Compression = Framed Compression (1)
ending Ack of id 157 to cb16cf04 (malibu)
User-Service = Framed-User
Framed-Protocol = PPP
Framed-Address = 203.22.207.252
Framed-Compression = Van-Jacobsen-TCP-IP

esp Time: 221 Auth: 27/20 -> 47 Acct: 35/0/0 -> 35
adrecv: Request from host cb16cf04 code=4, id=110, length=192
User-Name = "paulw"
NAS-Identifier = 203.22.207.4
Framed-Protocol = PPP
Framed-Address = 203.22.207.248
Unknown = "0080d380d600"
User-Service = Framed-User
Acct-Status-Type = Start
Acct-Session-Id = "00000a8c35869c5ac18744b6"
NAS-Port-Type = Async
NAS-Port = 20102
NAS-Port-DNIS = "94349999"
Acct-Authentic = RADIUS
eceived unknown attribute 77
Acct-Multi-Session-Id = "2791"
Acct-Link-Count = 1
Unknown = ""
Vendor-Specific = ""

SQL Statement: INSERT INTO Calls
(CallDate,UserName,NASIdentifier,FramedProtoco
,FramedAddress,AcctStatusType,AcctSessionId,NASPort,AcctAuthentic) VALUES
(Now(
,'paulw','203.22.207.4',1,'203.22.207.248',1,'00000a8c35869c5ac18744b6',2010
2,1

This leaves the connection with an IP address out of our dial-in pool of
203.22.207.xxx

Am I missing something obvious here?

___________________________

Paul W. Wilcox
Director - Sales and Marketing
Surf The Net Australia
Email: paulw@surfthe.net.au
Web: http://www.surfthe.net.au
Ph: 02 9439 9830
___________________________