I also used the NAS-Port-Type=ISDN and port limit set to 1.
But this profile connect to an async port. I have set this as a default for
this profile in Emerald Admin/config radius/default
My stupid question now is what the difference between a check attribute and
a reply attribute.
this how it appears in the users file :
Framed-Protocol = 1
NAS-Port-Type = 2
Port-Limit = 1
User-Service = 2
-----Original Message-----
From: Dale E. Reed Jr. <daler@iea-software.com>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: Thursday, June 11, 1998 08:00
Subject: Re: server port access
>Mourad Dahoumane wrote:
>>
>> I am trying to disallow access of analog users to Isdn service.
>> The problem is when you have a NAS with a Pri and a single dialup number.
>> Even if I set port type to async, they still can connect to ISDN,
>> same for isdn users who can connect to analog devices even if port is set
to
>> ISDN.
>> Am I using this parameter incorrectly ?
>>
>> Is there anyone there who has solved this problem ?
>
>You don't need serverport access for this. Just use a Check
>attribute with RadiusNT 2.5 of NAS-Port-Type and the respective
>types. I would guess you were using it as a reply attribute, not
>a check attribute.
>
>--
>Dale E. Reed Jr. (daler@iea-software.com)
>_________________________________________________________________
> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs
> Internet Solutions for Today | http://www.iea-software.com