[RadiusNT Digest]

radiusnt-digest-request@iea-software.com
Fri, 12 Jun 1998 00:00:36 -0700

Message 1: (no subject)
from Brad Barton <brad@mongolnet.mn>

Message 2: Re: Dedicated Link (Nailed Up Link)
from "Rudy Komsic" <rudyk@cyberglobe.net>

Message 3: Default entry to let everyone in.
from "Zak Wolfinger" <zak@cyberlink.com>

Message 4: RE: Dedicated Link (Nailed Up Link)
from Albert Churba <Albert@dialisdn.com>

Message 5: Start and Stop Time Format
from "Mauro J. Jaskelioff" <mauro@citynet.net.ar>

Message 6: Malformed packets RadiusNT v2.5
from postman@cp-tel.net (Postman Account)

Message 7: Re: Default entry to let everyone in.
from "Zak Wolfinger" <zak@cyberlink.com>

Message 8: Bad Digest
from postman@cp-tel.net (Postman Account)

Message 9: unsubscribe
from Ken Lenox <lenox@heiwa.com>

Message 10: unsubscribe
from Ken Lenox <lenox@heiwa.com>

Message 11: Re: unsubscribe
from Richad Willis <rdw@MNSi.Net>

Message 12: time and day restriction
from Christian Simard <simardc@netc.net>

Message 13: Re: Bad Digest
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 14: Re: Malformed packets RadiusNT v2.5
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 15: Re: Default entry to let everyone in.
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 16: Server access port
from eric@valleynetworking.com (Eric Cowperthwaite)

Message 17: Question about Email only accounts
from sun@larkom.net (Liankui Sun)

Message 18: Re: Server access port
from Dale Reed <daler@iea-software.com>

Message 19: Re: time and day restriction
from Dale Reed <daler@iea-software.com>

Message 20: Re: Start and Stop Time Format
from Dale Reed <daler@iea-software.com>

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: (no subject)
From: Brad Barton <brad@mongolnet.mn>
Date: Thu, 11 Jun 1998 17:36:25 +0900

unsubscribe radiusnt

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 2 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Dedicated Link (Nailed Up Link)
From: "Rudy Komsic" <rudyk@cyberglobe.net>
Date: Thu, 11 Jun 1998 05:06:59 -0400

This is a multi-part message in MIME format.

------=_NextPart_000_001E_01BD94F6.C30CBEE0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

If your using Emerald with RadiusNT, You can edit the actual user's =
Radius Configuration by clicking on the service tab > edit the username =
> and select the Radius tab to create your Radius Profile for that =
specific user.

-----Original Message-----
From: Ciro Vera <cirovera@interaccess.cl>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: June 10, 1998 1:11 PM
Subject: Re: Dedicated Link (Nailed Up Link)
=20
=20
=20
> Define dedicated. I assume you are talking about a NAILED PPP =
connection
Yes..... Sorry my english :(
=20
I'm looking for information in Ascend Site and found this:
=20
=20
=20
To establish a nailed-up link between two MAX TNT units, and have =
the connection use the channels in group 1, you would configure the =
pseudo-user profile as follows:
=20
permconn-SanFran-1 Password=3D"ascend", =
User-Service=3DDialout-Framed-User
User-Name=3D"LA",
Framed-Protocol=3DPPP,
Framed-Address=3D50.1.1.2,
Framed-Netmask=3D255.0.0.0,
Ascend-Route-IP=3DRoute-IP-Yes,
Ascend-Metric=3D7,
Framed-Routing=3DNone,
Ascend-Idle-Limit=3D0,
Ascend-Call-Type=3DNailed,
Ascend-Group=3D"1",
Ascend-FT1-Caller=3DFT1-Yes
=20
Then my question now is:
RadiusNT (in ODBC mode) work with pseudo-user profiles?
=20
=20
Thanks
Ciro Vera

------=_NextPart_000_001E_01BD94F6.C30CBEE0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">

If your using Emerald with RadiusNT, =You can=20edit the actual user's Radius Configuration by clicking on the service =tab >=20edit the username > and select the Radius tab to create your Radius =Profile=20for that specific user.
 
-----Original =Message-----
From:=20 Ciro Vera <cirovera@interaccess.cl>To:=20 radiusnt@iea-software.com=20 <radiusnt@iea-software.com&g=t;
Date:=20 June 10, 1998 1:11 PM
Subject: Re: Dedicated Link =(Nailed Up=20 Link)


> Define =dedicated.  I=20 assume you are talking about a NAILED PPP connection
Yes..... =Sorry my=20 english :(

I'm looking for information in Ascend Site and =found=20 this:



To establish a nailed-up link between two MAX =TNT=20 units, and have the connection use the channels in group 1, you =would=20 configure the pseudo-user profile as =follows:

permconn-SanFran-1=20 Password=3D"ascend",=20 =User-Service=3DDialout-Framed-User
      =;       User-Name=3D"LA",            = Framed-Protocol=3DPPP,
       =;      Framed-Address=3D50.1.1.2,
 =            F=ramed-Netmask=3D255.0.0.0,
       &=nbsp;     Ascend-Route-IP=3DRoute-IP-Yes,
&nb=sp;           &nbs=p;Ascend-Metric=3D7,
        &=nbsp;    Framed-Routing=3DNone,
   =          Ascend-Idle-L=imit=3D0,
          =   Ascend-Call-Type=3DNailed,
    &=nbsp;        Ascend-Group=3D"=;1",
          =   Ascend-FT1-Caller=3DFT1-Yes

Then=20 my question now is:
RadiusNT (in ODBC mode) work with pseudo-user = profiles?


Thanks
Ciro =Vera

------=_NextPart_000_001E_01BD94F6.C30CBEE0--..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 3 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Default entry to let everyone in.From: "Zak Wolfinger" Date: Thu, 11 Jun 1998 08:44:22 -0500In text mode, what would a default entry look like to let everyone in,regardless of username/password?Zak Wolfinger email: zak@cyberlink.comCyberLink, Inc. voice: (219) 235-1400213 S Main Street fax: (219) 235-1599South Bend, IN 46601 www: http://www.wolfinger.net/zak..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 4 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: Dedicated Link (Nailed Up Link)From: Albert Churba Date: Thu, 11 Jun 1998 08:53:19 -0400(assumption = unit name is MAX1, this is the fifth permconn for that MAX, the trunk group is 9, the phone number is 555-1212, and it's a 2B ISDN dial-out connection.) If this is a frame-relay connection to the MAX units, then this does not apply.permconn-MAX1-5 Password = "ascend" User-Name = Test, User-Service = Dialout-Framed-User, Framed-Protocol = MPP, Framed-Address = 192.168.2.17, Framed-Netmask = 255.255.255.240, Framed-Routing = None, Framed-Route = 192.168.2.16/28 192.168.2.17 1, Ascend-Base-Channel-Count = 2, Ascend-Maximum-Channels = 2, Ascend-Call-Type = Perm/Switched, Ascend-Send-Secret = password, Ascend-Metric = 2, Ascend-Dial-Number = 95551212, Ascend-Send-Auth = Send-Auth-PAP, Ascend-Minimum-Channels = 2, Ascend-Data-Svc = Switched-64K It's been a long time since we used a text file entry, so I hope I typed with the correct format. All of our profiles are defined with Emerald and the attribute/values are as shown above. If this does not answer your question you can always call Ascend at 800-272-3634 and get the proper attribute configuration from TAC.-----Original Message-----From: Rudy Komsic [SMTP:rudyk@cyberglobe.net]Sent: Thursday, June 11, 1998 5:07 AMTo: radiusnt@iea-software.comSubject: Re: Dedicated Link (Nailed Up Link)If your using Emerald with RadiusNT, You can edit the actual user's Radius Configuration by clicking on the service tab > edit the username > and select the Radius tab to create your Radius Profile for that specific user. -----Original Message----- From: Ciro Vera To: radiusnt@iea-software.com Date: June 10, 1998 1:11 PM Subject: Re: Dedicated Link (Nailed Up Link) > Define dedicated. I assume you are talking about a NAILED PPP connection Yes..... Sorry my english :( I'm looking for information in Ascend Site and found this: To establish a nailed-up link between two MAX TNT units, and have the connection use the channels in group 1, you would configure the pseudo-user profile as follows: permconn-SanFran-1 Password="ascend", User-Service=Dialout-Framed-User User-Name="LA", Framed-Protocol=PPP, Framed-Address=50.1.1.2, Framed-Netmask=255.0.0.0, Ascend-Route-IP=Route-IP-Yes, Ascend-Metric=7, Framed-Routing=None, Ascend-Idle-Limit=0, Ascend-Call-Type=Nailed, Ascend-Group="1", Ascend-FT1-Caller=FT1-Yes Then my question now is: RadiusNT (in ODBC mode) work with pseudo-user profiles? Thanks Ciro Vera << File: ATT00009.html >> ..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 5 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Start and Stop Time FormatFrom: "Mauro J. Jaskelioff" Date: Thu, 11 Jun 1998 10:52:39 -0700What=B4s the format of the fields StartTime and StopTime in the ServerAccesstable?************************* Mauro J. Jaskelioff ** mauro@citynet.net.ar ** Depto T=E9cnico ** Citynet S.A. *************************..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 6 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Malformed packets RadiusNT v2.5From: postman@cp-tel.net (Postman Account)Date: Thu, 11 Jun 1998 09:04:52 -0500Dale,Not sure if you are not receiving the messages...or are being selective in your responses....I've enabled accept malformed accounting packetsin RadiusNT v2.5 Administrator.What does this option do? If packets are malformed, are they still processed? If not, why accept them...? ...or why would you enable this option?Please explain... thanks in advance!..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 7 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Default entry to let everyone in.From: "Zak Wolfinger" Date: Thu, 11 Jun 1998 09:07:59 -0500Never mind, I found it in the list archives - sorry to post needlesslyto the list.-----Original Message-----From: Zak Wolfinger To: radiusnt@iea-software.com Date: Thursday, June 11, 1998 8:48 AMSubject: Default entry to let everyone in.|In text mode, what would a default entry look like to let everyonein,|regardless of username/password?||Zak Wolfinger email: zak@cyberlink.com|CyberLink, Inc. voice: (219) 235-1400|213 S Main Street fax: (219) 235-1599|South Bend, IN 46601 www: http://www.wolfinger.net/zak||..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 8 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Bad DigestFrom: postman@cp-tel.net (Postman Account)Date: Thu, 11 Jun 1998 09:29:31 -0500What are some of the possible causes of a Bad Digesterror message in the RadLogs?..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 9 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: unsubscribeFrom: Ken Lenox Date: Thu, 11 Jun 1998 23:13:01 +0900------ =_NextPart_000_01BD9593.EAF50820Content-Type: text/plain; charset="us-ascii"Content-Transfer-Encoding: 7bitunsubscribe------ =_NextPart_000_01BD9593.EAF50820Content-Type: application/ms-tnefContent-Transfer-Encoding: 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------ =_NextPart_000_01BD9593.EAF50820--..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 10 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: unsubscribeFrom: Ken Lenox Date: Thu, 11 Jun 1998 23:17:34 +0900------ =_NextPart_000_01BD9593.EDBD9E00Content-Type: text/plain; charset="us-ascii"Content-Transfer-Encoding: 7bit unsubscribe ------ =_NextPart_000_01BD9593.EDBD9E00Content-Type: application/ms-tnefContent-Transfer-Encoding: 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------ =_NextPart_000_01BD9593.EDBD9E00--..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 11 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: unsubscribeFrom: Richad Willis Date: Thu, 11 Jun 1998 13:37:07 -0400 unsubscribe from the puter of Richard Willis 519-681-8236..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 12 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: time and day restrictionFrom: Christian Simard Date: Thu, 11 Jun 1998 14:31:45 -0400Is there possible to restrict users logins based on time or dayrestriction? If so, is this feature available with 1.16 radiusor do I have to upgrade to the newest version?thank you!*----------------------------------------------------------*Christian Simard (System Administrator)Net Communications Inc.Acces-Cible Inc.Tel.: (514) 346-3401Fax : (514) 346-3587e-mail: simardc@netc.netweb: http://www.netc.net*----------------------------------------------------------*..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 13 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Bad DigestFrom: "Dale E. Reed Jr." Date: Thu, 11 Jun 1998 11:48:42 -0700Postman Account wrote:> > What are some of the possible causes of a Bad Digest> error message in the RadLogs?The secrets for the client and server don't match.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 14 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Malformed packets RadiusNT v2.5From: "Dale E. Reed Jr." Date: Thu, 11 Jun 1998 11:51:15 -0700Postman Account wrote:> > I've enabled accept malformed accounting packets> in RadiusNT v2.5 Administrator.Its a default for RadiusNT 2.5.120 and higher (because there areso many borken implementations of RADIUS out ther). Set it to0 to force a reject on them. > What does this option do?It allows packets with 0 length attributes to be accepted(whereas the RFC says to silently ignore it or reject it). > If packets are malformed, are they still processed?Only if it is a zero length issue. Otherwise its definatelyrejected. > If not, why accept them...? ...or why would> you enable this option?Because you are using a NAS from a company that couldprogram a RADIUS client to the spec.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 15 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Default entry to let everyone in.From: "Dale E. Reed Jr." Date: Thu, 11 Jun 1998 11:59:58 -0700Zak Wolfinger wrote:> > In text mode, what would a default entry look like to let everyone in,> regardless of username/password?The last entry would be:DEFAULTPassword = "ANY"Followed by the parameters you want.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 16 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Server access portFrom: eric@valleynetworking.com (Eric Cowperthwaite)Date: Thu, 11 Jun 1998 13:41:07 -0700If I set a certain nasport with a certain account type in theServerAccess table, does that mean that only that account typecan access that Nasport?i.e.ServerID Port AccountType ......2 22 SARThanks,Eric W. CowperthwaiteSystem EngineerValley Networking, Inc.eric@valleynetworking.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 17 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Question about Email only accountsFrom: sun@larkom.net (Liankui Sun)Date: Thu, 11 Jun 1998 13:59:47 -0700------ =_NextPart_000_01BD9541.327DA5B0Content-Type: text/plain; charset="us-ascii"Content-Transfer-Encoding: 7bitHi:I have some customers, they just need email only accounts, how can I limit themto access the WEB. Thanks! Liankui Sun-----Original Message-----From: Eric Cowperthwaite [SMTP:eric@valleynetworking.com]Sent: Thursday, June 11, 1998 1:41 PMTo: radiusnt@iea-software.comSubject: Server access portIf I set a certain nasport with a certain account type in theServerAccess table, does that mean that only that account typecan access that Nasport?i.e.ServerID Port AccountType ......2 22 SARThanks,Eric W. CowperthwaiteSystem EngineerValley Networking, Inc.eric@valleynetworking.com------ =_NextPart_000_01BD9541.327DA5B0Content-Type: application/ms-tnefContent-Transfer-Encoding: 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------ =_NextPart_000_01BD9541.327DA5B0--..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 18 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Server access portFrom: Dale Reed Date: Thu, 11 Jun 1998 18:55:46 -0700Eric Cowperthwaite wrote:> > If I set a certain nasport with a certain account type in the> ServerAccess table, does that mean that only that account type> can access that Nasport?> > i.e.> > ServerID Port AccountType ......> 2 22 SARYes. If you enable Server Access, then all accounttypes are deniedby default and only those you list are granted access.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 19 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: time and day restrictionFrom: Dale Reed Date: Thu, 11 Jun 1998 20:03:25 -0700Christian Simard wrote:> > Is there possible to restrict users logins based on time or day> restriction? If so, is this feature available with 1.16 radius> or do I have to upgrade to the newest version?The Server Port Aceess option allows time of day restrictions.You need to upgrade to RadiusNT 2.5 for this option.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 20 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Start and Stop Time FormatFrom: Dale Reed Date: Thu, 11 Jun 1998 20:08:08 -0700Mauro J. Jaskelioff wrote:> > What´s the format of the fields StartTime and StopTime in the ServerAccess> table?Minutes Since Midnight. For example 8:00am to 6:00pm (18:00) would 8 * 60 (480) and 18 * 60 (1080), respectively.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com