------=_NextPart_000_01BD9470.372F32D0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
> Define dedicated. I assume you are talking about a NAILED PPP connection
Yes..... Sorry my english :(
I'm looking for information in Ascend Site and found this:
To establish a nailed-up link between two MAX TNT units, and have the
connection use the channels in group 1, you would configure the pseudo-user
profile as follows:
permconn-SanFran-1 Password="ascend", User-Service=Dialout-Framed-User
User-Name="LA",
Framed-Protocol=PPP,
Framed-Address=50.1.1.2,
Framed-Netmask=255.0.0.0,
Ascend-Route-IP=Route-IP-Yes,
Ascend-Metric=7,
Framed-Routing=None,
Ascend-Idle-Limit=0,
Ascend-Call-Type=Nailed,
Ascend-Group="1",
Ascend-FT1-Caller=FT1-Yes
Then my question now is:
RadiusNT (in ODBC mode) work with pseudo-user profiles?
Thanks
Ciro Vera
------=_NextPart_000_01BD9470.372F32D0
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
> Define dedicated. I =assume you are talking about a NAILED PPP connection
Yes..... Sorry =my english :(
I'm looking for information in Ascend Site and =found this:
To establish a nailed-up link between two MAX =TNT units, and have the connection use the channels in group 1, you =would configure the pseudo-user profile as =follows:
permconn-SanFran-1 Password=3D"ascend", =User-Service=3DDialout-Framed-User
= &=nbsp;User-Name=3D"LA",
= &=nbsp;Framed-Protocol=3DPPP,
= &=nbsp;Framed-Address=3D50.1.1.2,
= &=nbsp;Framed-Netmask=3D255.0.0.0,
= &=nbsp;Ascend-Route-IP=3DRoute-IP-Yes,
= &=nbsp;Ascend-Metric=3D7,
= &=nbsp;Framed-Routing=3DNone,
= &=nbsp;Ascend-Idle-Limit=3D0,
= &=nbsp;Ascend-Call-Type=3DNailed,
= &=nbsp;Ascend-Group=3D"1",
= &=nbsp;Ascend-FT1-Caller=3DFT1-Yes
Then my question now =is:
RadiusNT (in ODBC mode) work with pseudo-user =profiles?
Thanks
Ciro Vera