Thanks for the Tip.
Indeed, somewhere in the CurrentControlSet registry, I saw that the modems
had S19=5 ( meaning disconnect if idle for more than 5 minutes ) eventhough
I set the modems to disconnect after 10 minutes in the NT control panel.
I changed the registry setting to S19=10 .
Questions:
1. Will the change take place immediately or do I have to restart the RRAS
or RAS service first ?
2. Is there a fix to this already ?
- Danny
-----Original Message-----
From: George G. Stossel <STOSSEL@DACOR.COM>
To: 'RadiusNT@iea-software.com' <RadiusNT@iea-software.com>
Date: Tuesday, May 05, 1998 9:03 AM
Subject: RE: Does idle-timeout work in RRAS ?
>Danny,
>
>Assuming the RRAS suffers the same problem as RAS under NT, the problem
>is that the GUI does not set the same registry entry as the software is
>looking at when the modems are programmed at service start up. This can
>be cured by editing the registry for each modem in the pool to establish
>the S##=# value that enables the idle time out for the given modem.
>Please note that not all modems use the same S register to record the
>idle timeout value.
>
>I can remember the registry path, but I got the information from the M$
>support site, under RAS.
>
>George
>
>George G. Stossel, President Phone:
>419.352.3568
>DACOR, Inc. FAX: 419.353.0149
>519 W. Wooster Street Sales: 800.447.5333
>Bowling Green, OH 43402-2763 03 USA Email:
>stossel@dacor.com
> WWW: http://www.dacor.com/
>
>
>
> -----Original Message-----
> From: Danny Sinang [SMTP:danny@uplink.com.ph]
> Sent: Monday, May 04, 1998 7:22 PM
> To: RADIUSNT
> Subject: Does idle-timeout work in RRAS ?
>
> Hello.
>
> I'm using RRAS ( w/ hotfix applied ) and idle-timeout doesn't
>seem to be
> working.
>
> Does anybody have RRAS that has idle-timeout working ?
>
> Danny Sinang
> President - Uplink Technologies, Inc.
> ( Provider of "Clean" Internet Access )
> www.uplink.com.ph
> danny@uplink.com.ph
>
>
> ----------------------------------------------------------
> RadiusNT Mailing List lists@iea-software.com
>
> ----------------------------------------------------------
> RadiusNT Mailing List lists@iea-software.com
>