Message 2: Re: Pagers and ISPs
from Rik Thomas <rikt@impaqcomp.com>
Message 3: Re: Pagers and ISPs
from Tony Morgan <tmorg@clnk.com>
Message 4: Re: Pagers and ISPs
from "Mike Stankavich" <mike@ethergate.com>
Message 5: Re: NT Drive Mirroring
from "Adam Breaux" <adam@idomains.net>
Message 6: Re: Entering Partial URL in Communicator 4.04
from "Adam Breaux" <adam@idomains.net>
Message 7: RE: Pagers and ISPs
from "Ken Sorenson" <ksoren@tsi-online.com>
Message 8: Re: Pagers and ISPs
from "Jeffrey Stevison" <jstevison@emeraldsurf.net>
Message 9: Re: Pagers and ISPs
from "Mike Stankavich" <mike@ethergate.com>
Message 10: Re: Pagers and ISPs
from "Jeffrey Stevison" <jstevison@emeraldsurf.net>
Message 11: Re: Entering Partial URL in Communicator 4.04
from "Danny Sinang" <danny@uplink.com.ph>
Message 12: Re: newbies ISP setup
from "Michael A. Davis Jr." <mike.davis@dcsol.com>
Message 13: Default page on IIS
from "Michael A. Davis Jr." <mike.davis@dcsol.com>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Pagers and ISPs
From: "David Payer" <david.payer@ia-omni.com>
Date: Mon, 17 Aug 1998 07:46:57 -0500
Subject: Pagers and ISPs
>I have had alot of request in the past couple of weeks for people who want
>to be able to receive email messages via their digital pagers
I have been looking at this:
I have no comments on it though.
David Payer
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 2 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Pagers and ISPs
From: Rik Thomas <rikt@impaqcomp.com>
Date: Mon, 17 Aug 1998 09:30:17 -0400
Contact Scott Gordon at sgordon@sbbs.net or see their web page at
http://www.beepit.net
I use the service and it works great. You can outsource all of your email
to pager needs to them and forget about the headaches. Tell Scott I sent ya
over and I am sure he will set you up with a demo account for a bit.
Rik Thomas
At 12:39 AM 8/17/98 -0500, you wrote:
>I have had alot of request in the past couple of weeks for people who want
>to be able to receive email messages via their digital pagers and I was
>wondering if I anyone know of any software that can do this. I'm thinking
>about offering this as a service to my users in the form or many giving
>them two email accounts like user@isp.net for their normal email and maybe
>a secondary account like user@pager.isp.net. It looks like a local pager
>company is providing about the same service.
>
>
>Lamar Townsend
>Microgear Computers & Microgear.Net
>lamar@shuttle.com
>lamar@microgear.net
>
>
>
---Looking to hire an Internet Professional?Looking for an Internet Job?http://www.ispjobs.orgA Community supported projectSponsor a Page at ISPJOBS for $10/month!
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 3 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Pagers and ISPsFrom: Tony Morgan <tmorg@clnk.com>Date: Mon, 17 Aug 1998 08:41:01 -0500
Our pager company offer the ability to this themselves. Then they give youyour pagers e-mail address and we just simply create an SMTP alias to thatpager's email address. It works perfectly. Our pager company is Teletouch.
Tony
Lamar Townsend wrote:
> I have had alot of request in the past couple of weeks for people who want> to be able to receive email messages via their digital pagers and I was> wondering if I anyone know of any software that can do this. I'm thinking> about offering this as a service to my users in the form or many giving> them two email accounts like user@isp.net for their normal email and maybe> a secondary account like user@pager.isp.net. It looks like a local pager> company is providing about the same service.>> Lamar Townsend> Microgear Computers & Microgear.Net> lamar@shuttle.com> lamar@microgear.net>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 4 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Pagers and ISPsFrom: "Mike Stankavich" <mike@ethergate.com>Date: Mon, 17 Aug 1998 09:41:24 -0700
Lamar,
Not sure if this is what you're looking for but IMail by ipswitch has amail-to-pager module. You should be aware the the RadiusNT/Emeraldintegration isn't very good for IMail, although I have a homegrown setupthat works well. They are at www.ipswitch.com.
Mike Stankavich, CTO
NorFab/ISP, Inc.921 SW Washington StPortland OR 97205
email: mike@ethergate.comwww - business: http://www.ethergate.comwww - personal: http://users.ethergate.com/mike
(503) 972-2810 office(503) 972-2823 fax
-----Original Message-----From: Lamar Townsend <lamar@shuttle.com>To: ntisp@iea-software.com <ntisp@iea-software.com>Date: Sunday, August 16, 1998 10:41 PMSubject: Pagers and ISPs
I have had alot of request in the past couple of weeks for people who wantto be able to receive email messages via their digital pagers and I waswondering if I anyone know of any software that can do this. I'm thinkingabout offering this as a service to my users in the form or many givingthem two email accounts like user@isp.net for their normal email and maybea secondary account like user@pager.isp.net. It looks like a local pagercompany is providing about the same service.
Lamar TownsendMicrogear Computers & Microgear.Netlamar@shuttle.comlamar@microgear.net
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 5 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: NT Drive MirroringFrom: "Adam Breaux" <adam@idomains.net>Date: Mon, 17 Aug 1998 13:40:49 -0400
Look for bad sectors/tracks.
-----Original Message-----From: WINNT <winnt@hotline.net.au>To: ntisp@iea-software.com <ntisp@iea-software.com>Date: Monday, August 17, 1998 2:20 AMSubject: Re: NT Drive Mirroring
Hello List,The configuration is:Disk0= 1Gb System & 3.5 Gb DATADisk1= mirror of disk0
As mentioned it is working fine on the sister server that is IDENTICLE inhardware, firmware and software.I carried out the same steps when doing both servers.After I mirrored the servers all seemed fine and both mirrors on both drivesappeared sucessful.After reboot the size of the system partition on disk1 had increased from1024Mb to 1028Mb and the data partition on disk1 had changed to unformattedpartition.No errors were listed in the event viewer.Yet the other server has been working fine.
HELP
Malcolm JoosseTechnical DirectorHotline Support Pty. Ltd. " Our Service is your Support "malcolm@hotline.net.auwww.hotline.net.au
-----Original Message-----From: mwagers@teamhuber.com <mwagers@teamhuber.com>To: ntisp@iea-software.com <ntisp@iea-software.com>Date: Friday, 14 August 1998 23:28Subject: Re: NT Drive Mirroring
>A mirror is exactly the same size as the master except for some allocation>bytes that are required during the mirror phase. I'm a bit confused how>you want to mirror the information?>>NT System Partition (disk0) -> Partition (disk1)>Data Partition (disk1) -> Data Partition (disk0)>>Is this correct?>>Regards,>Mitch Wagers>Systems Engineer - Huber & Associates, Inc.>Microsoft Certified Systems Engineer>>>>>>>Please respond to ntisp@iea-software.com>>To: winnt-inet@net-shopper.co.uk, "NTISP" <ntisp@emerald.iea.com>>cc: (bcc: Mitch Wagers/Huber & Associates)>Subject: NT Drive Mirroring>>>>>Hello List,>>I have a NT4SP3 server with 2x 4.5Gb UW SCSI drives.>I want to mirror the drives using NTdisk admin and NTFS.>I created a 1Gb(1024MB) NT partition for the system and then a 3.5Gb DATA>partition.>I then tried to create a mirror and the NT partition on the second drive>after the mirror went to 1028Mb.>This has now made it impossible to mirror the DATA as the size of the>second>drive is smaller than the first.>I had another server setup EXACTLY the same way and I hads no problem with>the mirroring of both drives.>The second server had the same hardware brands for everything.>>Why is this so>Please help>>Malcolm Joosse>Technical Director>Hotline Support Pty. Ltd. " Our Service is your Support ">malcolm@hotline.net.au>www.hotline.net.au>>>>>>>>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 6 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Entering Partial URL in Communicator 4.04From: "Adam Breaux" <adam@idomains.net>Date: Mon, 17 Aug 1998 13:46:46 -0400
This is controlled by "Pages in history expire after: ____ days
With it set to 0 it will not keep the list. It's really unclear why this isrelated.
-----Original Message-----From: Danny Sinang <danny@uplink.com.ph>To: NTISP <ntisp@iea-software.com>Date: Saturday, August 15, 1998 7:43 AMSubject: Entering Partial URL in Communicator 4.04
Hello.
A customer of ours is asking why the communicator 4.04 we installed on hermom's PC doesn't support the entering of partial URL's. I was caught bysurprise. I wasn't aware of any such features. She also told me that sheuses Netscape Gold 3.0 and it did support it. It works this way - you justtype "hotmail" in the GoTo field and it will direct you to www.hotmail.com .
This is confirmed by 4.04's docs saying :
To enter partial URLs------------------------------
If you omit certain parts of a URL in the location field, Navigatorautomatically completes the entry. You canomit the following:
The prefix http://. Navigator automatically adds the necessary prefix tocomplete the URL search.
The partial pathname http://www.. Navigator automatically adds thenecessary pathname to complete the URL search.
The suffix .com; Navigator automatically adds this suffix if none isspecified.
On Windows, when you begin to type a URL in the location field, Navigatorattempts to automatically completethe URL. As you type, Navigator checks for previously visited URLs thatmatch the letters you have typed and,if a match is found, fills in the remainder of the letters. If more than onematch occurs, you can press thedown-arrow key to fill in the next matching URL.Also on Windows, the location field offers a pop-up menu to the right of thefield. The menu contains up to 14URLs of pages whose locations you've most recently typed into the field andviewed. Choosing a URL item fromthis menu brings the page to your screen again. The URLs are retained in themenu for each of your Navigatorsessions.
-------------------------------------------------------------------------------------------------
So my question is, why is our version of Netscape not working this way ? Howdo I make it work ? I've looked at the preferences menu and found nothing toset.
Anybody have any ideas ?
Hope somebody could help me.
- Danny Sinang
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 7 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: Pagers and ISPsFrom: "Ken Sorenson" <ksoren@tsi-online.com>Date: Mon, 17 Aug 1998 14:28:59 -0500
Hello Mike. I am interested in how and what you have for a "home grown"Setup. I use Sendmail on NT, and need to do a little Home Brewing myself.Would you care to share some of your experience?
Thanks!
KSksoren@tsilink.net
-----Original Message-----From: ntisp-request@iea-software.com [mailto:ntisp-request@iea-software.com]On Behalf Of Mike StankavichSent: Monday, August 17, 1998 11:41 AMTo: ntisp@iea-software.comSubject: Re: Pagers and ISPs
Lamar,
Not sure if this is what you're looking for but IMail by ipswitch has amail-to-pager module. You should be aware the the RadiusNT/Emeraldintegration isn't very good for IMail, although I have a homegrown setupthat works well. They are at www.ipswitch.com.
Mike Stankavich, CTO
NorFab/ISP, Inc.921 SW Washington StPortland OR 97205
email: mike@ethergate.comwww - business: http://www.ethergate.comwww - personal: http://users.ethergate.com/mike
(503) 972-2810 office(503) 972-2823 fax
-----Original Message-----From: Lamar Townsend <lamar@shuttle.com>To: ntisp@iea-software.com <ntisp@iea-software.com>Date: Sunday, August 16, 1998 10:41 PMSubject: Pagers and ISPs
I have had alot of request in the past couple of weeks for people who wantto be able to receive email messages via their digital pagers and I waswondering if I anyone know of any software that can do this. I'm thinkingabout offering this as a service to my users in the form or many givingthem two email accounts like user@isp.net for their normal email and maybea secondary account like user@pager.isp.net. It looks like a local pagercompany is providing about the same service.
Lamar TownsendMicrogear Computers & Microgear.Netlamar@shuttle.comlamar@microgear.net
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 8 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Pagers and ISPsFrom: "Jeffrey Stevison" <jstevison@emeraldsurf.net>Date: Mon, 17 Aug 1998 14:42:47 -0500
I use iMail also, I would be interested in hearing about your homegrownsolution.
-----Original Message-----From: Mike Stankavich <mike@ethergate.com>To: ntisp@iea-software.com <ntisp@iea-software.com>Date: Monday, August 17, 1998 11:50 AMSubject: Re: Pagers and ISPs
>Lamar,>>Not sure if this is what you're looking for but IMail by ipswitch has a>mail-to-pager module. You should be aware the the RadiusNT/Emerald>integration isn't very good for IMail, although I have a homegrown setup>that works well. They are at www.ipswitch.com.>>Mike Stankavich, CTO>>NorFab/ISP, Inc.>921 SW Washington St>Portland OR 97205>>email: mike@ethergate.com>www - business: http://www.ethergate.com>www - personal: http://users.ethergate.com/mike>>(503) 972-2810 office>(503) 972-2823 fax>>-----Original Message----->From: Lamar Townsend <lamar@shuttle.com>>To: ntisp@iea-software.com <ntisp@iea-software.com>>Date: Sunday, August 16, 1998 10:41 PM>Subject: Pagers and ISPs>>>I have had alot of request in the past couple of weeks for people who want>to be able to receive email messages via their digital pagers and I was>wondering if I anyone know of any software that can do this. I'm thinking>about offering this as a service to my users in the form or many giving>them two email accounts like user@isp.net for their normal email and maybe>a secondary account like user@pager.isp.net. It looks like a local pager>company is providing about the same service.>>>Lamar Townsend>Microgear Computers & Microgear.Net>lamar@shuttle.com>lamar@microgear.net>>>>>>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 9 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Pagers and ISPsFrom: "Mike Stankavich" <mike@ethergate.com>Date: Mon, 17 Aug 1998 13:42:15 -0700
Jeffrey (and Ken),
As you may or may not know iMail stores its user information in the NTRegistry. What I have done is developed a Visual Basic app that calls theRegistry API and creates, updates or deletes all the necessary iMail accountinformation. I originally developed it as an ActiveX DLL called from atrigger using sp_OACreate, etc which worked fine when I was running SQL andiMail on the same server, but I had some problems with that approach when Imoved SQL to a different server. Now I have a table that I insert into witha trigger and run the VB program on the iMail server against that table on atimer. It's been pretty stable since I made that change. If I invested sometime I could remove my implementation-specific code so that anybody usingiMail could use it. I've also thought about making it a full-fledged NTservice, but I haven't had the time to do that so far. As I have aconsiderable amount of time and trouble invested in this program I'm notprepared to give it away. But if there's some interest I'll be glad to spenda little time and get it ready for prime time, so to speak. I wouldencourage anybody who is interested to contact me by private email and wecan discuss pricing options or even potentially joint development efforts.And yes, I can set up an evaluation.
Thanks for your interest,
Mike Stankavich, CTO
NorFab/ISP, Inc.921 SW Washington St, Suite 404Portland OR 97205
email: mike@ethergate.comwww - business: http://www.ethergate.comwww - personal: http://users.ethergate.com/mike
(503) 972-2810 office(503) 972-2823 fax
-----Original Message-----From: Jeffrey Stevison <jstevison@emeraldsurf.net>To: ntisp@iea-software.com <ntisp@iea-software.com>Date: Monday, August 17, 1998 12:45 PMSubject: Re: Pagers and ISPs
I use iMail also, I would be interested in hearing about your homegrownsolution.
-----Original Message-----From: Mike Stankavich <mike@ethergate.com>To: ntisp@iea-software.com <ntisp@iea-software.com>Date: Monday, August 17, 1998 11:50 AMSubject: Re: Pagers and ISPs
>Lamar,>>Not sure if this is what you're looking for but IMail by ipswitch has a>mail-to-pager module. You should be aware the the RadiusNT/Emerald>integration isn't very good for IMail, although I have a homegrown setup>that works well. They are at www.ipswitch.com.>>Mike Stankavich, CTO>>NorFab/ISP, Inc.>921 SW Washington St>Portland OR 97205>>email: mike@ethergate.com>www - business: http://www.ethergate.com>www - personal: http://users.ethergate.com/mike>>(503) 972-2810 office>(503) 972-2823 fax>>-----Original Message----->From: Lamar Townsend <lamar@shuttle.com>>To: ntisp@iea-software.com <ntisp@iea-software.com>>Date: Sunday, August 16, 1998 10:41 PM>Subject: Pagers and ISPs>>>I have had alot of request in the past couple of weeks for people who want>to be able to receive email messages via their digital pagers and I was>wondering if I anyone know of any software that can do this. I'm thinking>about offering this as a service to my users in the form or many giving>them two email accounts like user@isp.net for their normal email and maybe>a secondary account like user@pager.isp.net. It looks like a local pager>company is providing about the same service.>>>Lamar Townsend>Microgear Computers & Microgear.Net>lamar@shuttle.com>lamar@microgear.net>>>>>>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 10 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Pagers and ISPsFrom: "Jeffrey Stevison" <jstevison@emeraldsurf.net>Date: Mon, 17 Aug 1998 16:06:51 -0500
That's an interesting approach, I will investigate it on my end. I'm aDelphi programmer myself. Thanks for the clues though.
-----Original Message-----From: Mike Stankavich <mike@ethergate.com>To: ntisp@iea-software.com <ntisp@iea-software.com>Date: Monday, August 17, 1998 3:51 PMSubject: Re: Pagers and ISPs
>Jeffrey (and Ken),>>As you may or may not know iMail stores its user information in the NT>Registry. What I have done is developed a Visual Basic app that calls the>Registry API and creates, updates or deletes all the necessary iMailaccount>information. I originally developed it as an ActiveX DLL called from a>trigger using sp_OACreate, etc which worked fine when I was running SQL and>iMail on the same server, but I had some problems with that approach when I>moved SQL to a different server. Now I have a table that I insert into with>a trigger and run the VB program on the iMail server against that table ona>timer. It's been pretty stable since I made that change. If I invested some>time I could remove my implementation-specific code so that anybody using>iMail could use it. I've also thought about making it a full-fledged NT>service, but I haven't had the time to do that so far. As I have a>considerable amount of time and trouble invested in this program I'm not>prepared to give it away. But if there's some interest I'll be glad tospend>a little time and get it ready for prime time, so to speak. I would>encourage anybody who is interested to contact me by private email and we>can discuss pricing options or even potentially joint development efforts.>And yes, I can set up an evaluation.>>Thanks for your interest,>>Mike Stankavich, CTO>>NorFab/ISP, Inc.>921 SW Washington St, Suite 404>Portland OR 97205>>email: mike@ethergate.com>www - business: http://www.ethergate.com>www - personal: http://users.ethergate.com/mike>>(503) 972-2810 office>(503) 972-2823 fax>>>-----Original Message----->From: Jeffrey Stevison <jstevison@emeraldsurf.net>>To: ntisp@iea-software.com <ntisp@iea-software.com>>Date: Monday, August 17, 1998 12:45 PM>Subject: Re: Pagers and ISPs>>>I use iMail also, I would be interested in hearing about your homegrown>solution.>>-----Original Message----->From: Mike Stankavich <mike@ethergate.com>>To: ntisp@iea-software.com <ntisp@iea-software.com>>Date: Monday, August 17, 1998 11:50 AM>Subject: Re: Pagers and ISPs>>>>Lamar,>>>>Not sure if this is what you're looking for but IMail by ipswitch has a>>mail-to-pager module. You should be aware the the RadiusNT/Emerald>>integration isn't very good for IMail, although I have a homegrown setup>>that works well. They are at www.ipswitch.com.>>>>Mike Stankavich, CTO>>>>NorFab/ISP, Inc.>>921 SW Washington St>>Portland OR 97205>>>>email: mike@ethergate.com>>www - business: http://www.ethergate.com>>www - personal: http://users.ethergate.com/mike>>>>(503) 972-2810 office>>(503) 972-2823 fax>>>>-----Original Message----->>From: Lamar Townsend <lamar@shuttle.com>>>To: ntisp@iea-software.com <ntisp@iea-software.com>>>Date: Sunday, August 16, 1998 10:41 PM>>Subject: Pagers and ISPs>>>>>>I have had alot of request in the past couple of weeks for people who want>>to be able to receive email messages via their digital pagers and I was>>wondering if I anyone know of any software that can do this. I'm thinking>>about offering this as a service to my users in the form or many giving>>them two email accounts like user@isp.net for their normal email and maybe>>a secondary account like user@pager.isp.net. It looks like a local pager>>company is providing about the same service.>>>>>>Lamar Townsend>>Microgear Computers & Microgear.Net>>lamar@shuttle.com>>lamar@microgear.net>>>>>>>>>>>>>>>>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 11 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Entering Partial URL in Communicator 4.04From: "Danny Sinang" <danny@uplink.com.ph>Date: Tue, 18 Aug 1998 09:05:53 +0800
It's set to 9 days.
But typing just cnn still won't resolve to www.cnn.com
What else could be wrong ? Should I just upgrade to 4.05 which has smartbrowsing ?
- Danny Sinang
-----Original Message-----From: Adam Breaux <adam@idomains.net>To: ntisp@iea-software.com <ntisp@iea-software.com>Date: Tuesday, August 18, 1998 3:27 AMSubject: Re: Entering Partial URL in Communicator 4.04
>This is controlled by "Pages in history expire after: ____ days>>With it set to 0 it will not keep the list. It's really unclear why this is>related.>>-----Original Message----->From: Danny Sinang <danny@uplink.com.ph>>To: NTISP <ntisp@iea-software.com>>Date: Saturday, August 15, 1998 7:43 AM>Subject: Entering Partial URL in Communicator 4.04>>>Hello.>>A customer of ours is asking why the communicator 4.04 we installed on her>mom's PC doesn't support the entering of partial URL's. I was caught by>surprise. I wasn't aware of any such features. She also told me that she>uses Netscape Gold 3.0 and it did support it. It works this way - you just>type "hotmail" in the GoTo field and it will direct you to www.hotmail.com..>>This is confirmed by 4.04's docs saying :>>To enter partial URLs>------------------------------>>If you omit certain parts of a URL in the location field, Navigator>automatically completes the entry. You can>omit the following:>> The prefix http://. Navigator automatically adds the necessary prefix to>complete the URL search.>> The partial pathname http://www.. Navigator automatically adds the>necessary pathname to complete the> URL search.>> The suffix .com; Navigator automatically adds this suffix if none is>specified.>>On Windows, when you begin to type a URL in the location field, Navigator>attempts to automatically complete>the URL. As you type, Navigator checks for previously visited URLs that>match the letters you have typed and,>if a match is found, fills in the remainder of the letters. If more thanone>match occurs, you can press the>down-arrow key to fill in the next matching URL.>Also on Windows, the location field offers a pop-up menu to the right ofthe>field. The menu contains up to 14>URLs of pages whose locations you've most recently typed into the field and>viewed. Choosing a URL item from>this menu brings the page to your screen again. The URLs are retained inthe>menu for each of your Navigator>sessions.>>---------------------------------------------------------------------------->--------------------->>So my question is, why is our version of Netscape not working this way ?How>do I make it work ? I've looked at the preferences menu and found nothingto>set.>>Anybody have any ideas ?>>Hope somebody could help me.>>- Danny Sinang>>>>>>>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 12 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: newbies ISP setupFrom: "Michael A. Davis Jr." <mike.davis@dcsol.com>Date: Mon, 17 Aug 1998 21:18:52 -0400
I would recommend that you get at least 384K for 50 lines... 128K startsslowing down quickly after about 15 lines.
Mike
-----Original Message-----From: Ken Chua <ken@neat.com.sg>To: ntisp@iea-software.com <ntisp@iea-software.com>Date: Friday, August 14, 1998 10:27 AMSubject: newbies ISP setup
>Dear All>>We hope to start up an ISP business with about 50 lines and running of a>128K upstream.>Can any kind soul pls recommend equipments and softwares.?>We will be providing the standard Internet access and also Internettelephony.>>a.) dial-up access equipment>b.) servers>c.) billing or management softwares>d.) routers (we are thinking of using DLink as the price is very cheap)>e.) any other equipments we might need.>>Thank you>Kenzie
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 13 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Default page on IISFrom: "Michael A. Davis Jr." <mike.davis@dcsol.com>Date: Mon, 17 Aug 1998 21:22:54 -0400
I just rebuilt our primary web server... added a couple of drives andstripped them, and when I got it back up I went to add"index.htm,default.html,index.html" to the default document setting in IIS.This is how I have always had it setup... it's that way right now on mybackup server, but if I have anything other than "default.htm" on the lineby itself, the server will not load any default document at all! By theway, this is IIS 3.0 on NT4 SP3.
Any ideas?
Thanks, Mike