Rgds
Dan
-------------------------------------------
Dan Waldron
Diversified Data
dan@diversified.com.au
http://www.diversified.com.au
Ph: 0417-659-828 (+61-417-659-828)
Fx: 02-9832-0951 (+61-2-9832-0951)
-----Original Message-----
From: Juergen Weiss <weiss@wwweiss.de>
To: ntisp@iea-software.com <ntisp@iea-software.com>
Date: Saturday, 25 July 1998 22:26
Subject: Re: Routing?
>If you use 255.255.255.0 then 203.29.98.1 expects that 203.29.98.254 is
>within its network, but this is not the case. You must use two subnets with
>netmask 255.255.255.127, assign Server 1 (203.29.98.1) as default gateway
on
>each client and also aktivate IP-forwarding between the two NICs.
>
>If you want to open both subnets, I do not understand why you don't just
use
>one NIC in server 1. Am I missing something?
>
>Juergen
>
>-----Ursprüngliche Nachricht-----
>Von: Dan Waldron <dan@diversified.com.au>
>An: ntisp@iea-software.com <ntisp@iea-software.com>
>Datum: Samstag, 25. Juli 1998 12:46
>Betreff: Re: Routing?
>
>
>>They are all netmask 255.255.255.0 (203.29.98 is a class C), Server 1
>>(203.29.98.1) is connected to the net via an ISDN TA. Aside from the net
>>connection, on the internal network 203.29.98.6 can't ping 203.29.98.254,
>>(NIC 2 on Server 2) but CAN ping 203.29.98.2 (NIC 1 on Server 2) RRAS is
>>not installed on any of the PCs.
>>
>>Rgds
>>Dan
>>
>>-------------------------------------------
>>Dan Waldron
>>Diversified Data
>>dan@diversified.com.au
>>http://www.diversified.com.au
>>Ph: 0417-659-828 (+61-417-659-828)
>>Fx: 02-9832-0951 (+61-2-9832-0951)
>>
>>-----Original Message-----
>>From: Kevin Ingram <kingram@cameron.net>
>>To: ntisp@iea-software.com <ntisp@iea-software.com>
>>Date: Saturday, 25 July 1998 20:14
>>Subject: Re: Routing?
>>
>>
>>>What are the netmasks for each network?
>>>Which machine is connected to the Internet and how?
>>>Are you running RRAS on these servers?
>>>
>>>Kevin Ingram
>>>
>>>-----Original Message-----
>>>From: Dan Waldron <dan@diversified.com.au>
>>>To: ntisp <ntisp@iea-software.com>
>>>Date: Saturday, July 25, 1998 2:23 AM
>>>Subject: Routing?
>>>
>>>
>>>>Good evening everyone, whereever you may be. I have a little scenario I
>>>>would like you to consider. It's two networks linked together through a
>>>>server that is not directly connected to the net. Here is the topology:
>>>>
>>>>
>>>>
>>>>Internet -> Server 1: 203.29.98.1 -> Server 2 (NIC 1): 203.29.98.2 ->
>>>Server
>>>>2 (NIC 2): 203.29.98.254 -> Client 1: 203.29.98.253
>>>>
>>>>Server 1 can see Server 2 (NIC1) OK but can't see Server 2 (NIC 2). As a
>>>>result, Client 1 will not be able to see the Internet (I assume).
Another
>>>>Client (Client 2) - (203.29.98.6) which is part of the network that
>Server
>>>1
>>>>and Server 2 (NIC 1) can still see the net OK but can't see Server 2
(NIC
>>>>2).
>>>>
>>>>I assume this is a routing thing. What do I have to do, and on which
>>>>machine, to get the network running correctly?
>>>>
>>>>Any assistance appreciated.
>>>>
>>>>Regards
>>>>Dan
>>>>
>>>>-------------------------------------------
>>>>Dan Waldron
>>>>Diversified Data
>>>>dan@diversified.com.au
>>>>http://www.diversified.com.au
>>>>Ph: 0417-659-828 (+61-417-659-828)
>>>>Fx: 02-9832-0951 (+61-2-9832-0951)
>>>>
>>>>
>>>
>>
>>
>>
>