If you want to connect two computers together with a cable, you must swap
the Rx and Tx pins on one end of the cable. The easiest way to do this is
to just buy a Null Modem cable with two female connectors and plug it in.
Regards,
Randy
==================================================
Randy Martin Voice: (512) 485-7977
Partner eMail: randy@austintx.net
Austin Internet URL: http://www.austintx.net
==================================================
>
>
>
>-----Original Message-----
>From: Endre Palfi <endre@ufonet.net>
>To: 'ntisp@iea-software.com' <ntisp@iea-software.com>
>Date: Tuesday, July 14, 1998 8:31 AM
>Subject: RE: Pinout of straight thru serial cable
>
>
>>Let me guess: "Straight Thru" (is this a joke?)
>>
>>> ----------
>>> From: Danny Sinang[SMTP:danny@uplink.com.ph]
>>> Reply To: ntisp@iea-software.com
>>> Sent: Monday, July 13, 1998 5:21 PM
>>> To: NTISP
>>> Subject: OT: Pinout of straight thru serial cable
>>>
>>> Hello.
>>>
>>> Does anybody know what the pinout of a straight thru serial cable
>>> looks like
>>> ?
>>>
>>> Danny Sinang
>>>
>