Message 2: RE: Statistics Server 4 from Mediahouse
from "Gregory Gooden (Annex)" <ggooden@exc1.annex.com>
Message 3: RE: Statistics Server 4 from Mediahouse
from Christian Schmit <cschmit@vo.lu>
Message 4: Enable IP Forwarding - always
from "Danny Sinang" <danny@uplink.com.ph>
Message 5:
from "Latini, Francis (Frank) A" <LATINIFA@gru.com>
Message 6: Fw: .mid files
from "Greg Martin" <greg@earth1.net>
Message 7: Re: Statistics Server 4 from Mediahouse
from Jeff Woods <jwoods@delta.com>
Message 8: Web Counter component
from Brian Lube <brian@mpinet.net>
Message 9: RE: Enable IP Forwarding - always
from Endre Palfi <endre@ufonet.net>
Message 10: FS: USR Modem Pool/16 and 16 I-modem with Digiboard EPC/X System
from "Rudy Komsic" <rudyk@cyberglobe.net>
Message 11: (no subject)
from Danny <Danny@elink.net>
Message 12: Re: USR Modem Pool/16 and 16 I-modem with Digiboard EPC/X System
from "Rudy Komsic" <rudyk@cyberglobe.net>
Message 13: IIS4 customer-maintained-directory-access-permissions?
from "bp" <bpollinger@x-box.com>
Message 14: Re: IIS4 customer-maintained-directory-access-permissions?
from "David Payer" <david.payer@ia-omni.com>
Message 15: IIS4 customer-maintained-directory-access-permissions?
from "bp" <bpollinger@x-box.com>
Message 16: RE: IIS4 customer-maintained-directory-access-permissions?
from "Gregory Gooden (Annex)" <ggooden@exc1.annex.com>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Statistics Server 4 from Mediahouse
From: Christian Schmit <cschmit@vo.lu>
Date: Tue, 07 Jul 1998 09:02:26 +0200
Hi,
We use SS4 since a few months now and we are experiencing very serious
memory problems with it. Tried SS4 already on 3 different servers, for now
it is running on a dual P-II with 256MB RAM. After it was running for 2 days
there were only 50 MB of free memory remaining.
Starting and stopping the SS4 service immediately freed up some 130MB??
We only monitor some 10-14 virtual web servers from IIS4 which are not very
busy. This bug is 100% reproducible.
I get no answer from Mediahouse if they are working on the problem.
Running NT4 server + SP3 + hotfixes.
Anyone having seen this?
Thanks,
Christian
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 2 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: RE: Statistics Server 4 from Mediahouse
From: "Gregory Gooden (Annex)" <ggooden@exc1.annex.com>
Date: Tue, 7 Jul 1998 00:05:03 -0700
I can confirm that I've had "memory leak" issues with SS4, but the GOOD
NEWS is that there are some "BETAs" going on right now that seem to
address that issue...
Hang tight! It's a fantastic package.
Gregory
> -----Original Message-----
> From: Christian Schmit [mailto:cschmit@vo.lu]
> Sent: Tuesday, July 07, 1998 12:02 AM
> To: ntisp@iea-software.com
> Subject: Statistics Server 4 from Mediahouse
>
>
> Hi,
>
> We use SS4 since a few months now and we are experiencing
> very serious
> memory problems with it. Tried SS4 already on 3 different
> servers, for now
> it is running on a dual P-II with 256MB RAM. After it was
> running for 2 days
> there were only 50 MB of free memory remaining.
>
> Starting and stopping the SS4 service immediately freed up
> some 130MB??
> We only monitor some 10-14 virtual web servers from IIS4
> which are not very
> busy. This bug is 100% reproducible.
>
> I get no answer from Mediahouse if they are working on the problem.
>
> Running NT4 server + SP3 + hotfixes.
>
> Anyone having seen this?
>
> Thanks,
> Christian
>
>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 3 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: RE: Statistics Server 4 from Mediahouse
From: Christian Schmit <cschmit@vo.lu>
Date: Tue, 07 Jul 1998 09:11:10 +0200
At 12:05 AM 7/7/98 -0700, you wrote:
>I can confirm that I've had "memory leak" issues with SS4, but the GOOD
>NEWS is that there are some "BETAs" going on right now that seem to
>address that issue...
>
>Hang tight! It's a fantastic package.
>
Hi,
I also like the program and I want to stay with it.
Hoping to see a fix for this issue soon. For the moment I am
starting and stopping SS4 service all night at 3:00AM to free
up the memory.
Christian
>Gregory
>
>
>> -----Original Message-----
>> From: Christian Schmit [mailto:cschmit@vo.lu]
>> Sent: Tuesday, July 07, 1998 12:02 AM
>> To: ntisp@iea-software.com
>> Subject: Statistics Server 4 from Mediahouse
>>
>>
>> Hi,
>>
>> We use SS4 since a few months now and we are experiencing
>> very serious
>> memory problems with it. Tried SS4 already on 3 different
>> servers, for now
>> it is running on a dual P-II with 256MB RAM. After it was
>> running for 2 days
>> there were only 50 MB of free memory remaining.
>>
>> Starting and stopping the SS4 service immediately freed up
>> some 130MB??
>> We only monitor some 10-14 virtual web servers from IIS4
>> which are not very
>> busy. This bug is 100% reproducible.
>>
>> I get no answer from Mediahouse if they are working on the problem.
>>
>> Running NT4 server + SP3 + hotfixes.
>>
>> Anyone having seen this?
>>
>> Thanks,
>> Christian
>>
>>
>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 4 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Enable IP Forwarding - always
From: "Danny Sinang" <danny@uplink.com.ph>
Date: Tue, 7 Jul 1998 17:37:11 +0800
Hi.
I'm running NT4 w/ SP3.
I noticed that everytime I change something regarding the network, the
Enable IP Forwarding checkbox gets unchecked after a reboot.
Is there a way I can make it always checked ?
Hope somebody knows.
Danny Sinang
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 5 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject:
From: "Latini, Francis (Frank) A" <LATINIFA@gru.com>
Date: Tue, 7 Jul 1998 08:53:17 -0400
unsubscribe
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 6 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Fw: .mid files
From: "Greg Martin" <greg@earth1.net>
Date: Tue, 7 Jul 1998 09:23:04 -0400
Thanks to all who offered help.
This corrected the problem.
Greg
>> From: Greg Martin <greg@earth1.net>
>> I am running NT4.0 with IIS 4 and my users pages that contain .mid files
>for
>> background music on their pages play fine with Internet Explorer but will
>> not play with Netscape Navigator. The exact same files loaded on another
>> provider play with both browsers. Does anyone have a suggestion to what
>> might be wrong. Maybe an IIS setting?
>
>In IIS4's Management Console, right-click on your servername under Console
>Root / Internet Info Server and choose Properties.
>Click on the File Types button.
>If the following don't exist add them:
> Extension: mid
> Mime: audio/x-midi
>and
> Extension: midi
> Mime: audio/x-midi
>
>I don't remember if you have to stop/restart IIS or not.
>
>Josh Hillman
>hillman@talstar.com
>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 7 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Statistics Server 4 from Mediahouse
From: Jeff Woods <jwoods@delta.com>
Date: Tue, 07 Jul 1998 09:36:51 -0400
I host over 50 sites on SS4 on a Pentium-166 with 64 megs of RAM. No
problems here.
At 09:02 AM 7/7/98 +0200, you wrote:
>Hi,
>
>We use SS4 since a few months now and we are experiencing very serious
>memory problems with it. Tried SS4 already on 3 different servers, for now
>it is running on a dual P-II with 256MB RAM. After it was running for 2 days
>there were only 50 MB of free memory remaining.
>
>Starting and stopping the SS4 service immediately freed up some 130MB??
>We only monitor some 10-14 virtual web servers from IIS4 which are not very
>busy. This bug is 100% reproducible.
>
>I get no answer from Mediahouse if they are working on the problem.
>
>Running NT4 server + SP3 + hotfixes.
>
>Anyone having seen this?
>
>Thanks,
>Christian
>
>
>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 8 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Web Counter component
From: Brian Lube <brian@mpinet.net>
Date: Tue, 07 Jul 1998 09:45:48 -0400
We are using the Web Counter component of IIS4 on two separate domains, but
the main site for both of these sites are using the exact same counter (and
thus the number are completely off). If I change the name of the page the
problem goes away (the problem is that index.asp is our default document).
Has anyone else run into this problem?
Thanks for any help!
Brian Lube
senior technician
MPInet
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 9 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: RE: Enable IP Forwarding - always
From: Endre Palfi <endre@ufonet.net>
Date: Tue, 7 Jul 1998 10:04:04 -0700
well, you need to have some sort of routing protocol enabled. Add RIP
service, configure it and then enable IP forwarding. it will work like
that.
> ----------
> From: Danny Sinang[SMTP:danny@uplink.com.ph]
> Reply To: ntisp@iea-software.com
> Sent: Tuesday, July 07, 1998 2:37 AM
> To: NTISP
> Subject: Enable IP Forwarding - always
>
> Hi.
>
> I'm running NT4 w/ SP3.
>
> I noticed that everytime I change something regarding the network, the
> Enable IP Forwarding checkbox gets unchecked after a reboot.
>
> Is there a way I can make it always checked ?
>
> Hope somebody knows.
>
> Danny Sinang
>
>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 10 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: FS: USR Modem Pool/16 and 16 I-modem with Digiboard EPC/X System
From: "Rudy Komsic" <rudyk@cyberglobe.net>
Date: Tue, 7 Jul 1998 15:12:29 -0400
We have the Following Equipment currently for sale.
3 x USR MP/16 Modem Rack
1 x USR MP/16I ISDN Modem Rack
2 x Digiboard EPC/X Concentrators (RJ-45)
2 x Digiboard EPC/X Concentrator (DB-25)
47 x RJ45 Connectors (10 Pin to 8 Pin)
32 x DB-25 to RJ-45
This is a 64 Port Access system that runs extremely well. We prefer to sell
the Whole bundle together but can be sold seprately.
Please forward your bids to rudyk@cyberglobe.net
Thank you.
----
Rudy Komsic
President, Network Administrator - Cyberglobe Communications Inc.
4996 Place de la Savane, Suite 200, Montreal, Quebec, H4P 1Z6
Tel: (514)342-3883 Fax: (514)342-5139 E-Mail: rudyk@cyberglobe.net
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 11 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: (no subject)
From: Danny <Danny@elink.net>
Date: Tue, 07 Jul 1998 15:37:42 -0400
unsubscribe
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 12 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: USR Modem Pool/16 and 16 I-modem with Digiboard EPC/X System
From: "Rudy Komsic" <rudyk@cyberglobe.net>
Date: Tue, 7 Jul 1998 18:30:25 -0400
Addition to this offer that was not mentioned was:
1 x Digiboard EPC/X Controller Card ISA
-----Original Message-----
From: Rudy Komsic <rudyk@cyberglobe.net>
To: ntisp@emerald.iea.com <ntisp@emerald.iea.com>
Date: July 7, 1998 3:18 PM
Subject: FS: USR Modem Pool/16 and 16 I-modem with Digiboard EPC/X System
>We have the Following Equipment currently for sale.
>
>3 x USR MP/16 Modem Rack
>1 x USR MP/16I ISDN Modem Rack
>2 x Digiboard EPC/X Concentrators (RJ-45)
>2 x Digiboard EPC/X Concentrator (DB-25)
>47 x RJ45 Connectors (10 Pin to 8 Pin)
>32 x DB-25 to RJ-45
>
>This is a 64 Port Access system that runs extremely well. We prefer to sell
>the Whole bundle together but can be sold seprately.
>
>Please forward your bids to rudyk@cyberglobe.net
>
>Thank you.
>
>----
>Rudy Komsic
>President, Network Administrator - Cyberglobe Communications Inc.
>4996 Place de la Savane, Suite 200, Montreal, Quebec, H4P 1Z6
>Tel: (514)342-3883 Fax: (514)342-5139 E-Mail: rudyk@cyberglobe.net
>
>
>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 13 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: IIS4 customer-maintained-directory-access-permissions?
From: "bp" <bpollinger@x-box.com>
Date: Wed, 8 Jul 1998 04:23:18 +0200
Hi all,
does anybody know a way to let web-customers set up password-secured
directories without giving access to SAM or NTFS specs?
They should be able to create a directory and/or files and specify
username/password lists who then can access their "premium-content"
P.S:: For use on WIN-NT with IIS4...
Regards Bernd
-------------------------------------------------------------------
X-BOX Online Service GmbH
Buelowstrasse 90, 10783 Berlin, Germany
fon: 030-26554330 fax: 030-26554332
http://www.x-box.com e/m: info@x-box.com
-------------------------------------------------------------------
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 14 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: IIS4 customer-maintained-directory-access-permissions?
From: "David Payer" <david.payer@ia-omni.com>
Date: Tue, 7 Jul 1998 21:21:51 -0500
>Hi all,
>
>does anybody know a way to let web-customers set up password-secured
>directories without giving access to SAM or NTFS specs?
http://www.vircom.com/isapifilter/
David Payer
www.ia-omni.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 15 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: IIS4 customer-maintained-directory-access-permissions?
From: "bp" <bpollinger@x-box.com>
Date: Wed, 8 Jul 1998 04:26:00 +0200
Hi all,
does anybody know a way to let web-customers set up password-secured
directories without giving access to SAM or NTFS specs?
They should be able to create a directory and/or files and specify
username/password lists who then can access their "premium-content"
P.S:: For use on WIN-NT with IIS4...
Regards Bernd
-------------------------------------------------------------------
X-BOX Online Service GmbH
Buelowstrasse 90, 10783 Berlin, Germany
fon: 030-26554330 fax: 030-26554332
http://www.x-box.com e/m: info@x-box.com
-------------------------------------------------------------------
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 16 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: RE: IIS4 customer-maintained-directory-access-permissions?
From: "Gregory Gooden (Annex)" <ggooden@exc1.annex.com>
Date: Tue, 7 Jul 1998 19:57:01 -0700
This seems to be my day for talking about Vircom (heh heh)...
http://www.vircom.com and check out a product called the VOP ISAPI
Filter. It allows you to set up, for your hosted customers) ODBC
Databases (and text files too) on a domain by domain basis... You could
use ASP to build a management system for the database too... (we use
Cold Fusion at my company for it)..
Gregory
annex.com, Inc.
> Hi all,
>
> does anybody know a way to let web-customers set up password-secured
> directories without giving access to SAM or NTFS specs?
> They should be able to create a directory and/or files and specify
> username/password lists who then can access their "premium-content"
>
> P.S:: For use on WIN-NT with IIS4...
>
> Regards Bernd
>