[Emerald Digest]

emerald-digest-request@iea-software.com
Sat, 8 Aug 1998 00:00:00 -0700

Message 1: Re: Setup of Total Control
from Ray Carpenter <ray@systec.com>

Message 2: Re: Fwd: Emerald & ASP
from will@greennet.net (Will LaSala)

Message 3: Re: Fwd: Emerald & ASP
from will@greennet.net (Will LaSala)

Message 4: Re: Setup of Total Control
from "Derrick Young" <dyoung@thenew.net>

Message 5: Re: Fwd: Emerald & ASP
from will@greennet.net (Will LaSala)

Message 6: Re: Setup of Total Control
from Ray Carpenter <ray@systec.com>

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Setup of Total Control
From: Ray Carpenter <ray@systec.com>
Date: Fri, 07 Aug 1998 09:39:29 -0400

The Total Control's support accounting with RadiusNT just fine. Have you set the server ports correctly in radius?  If you arerunning a netserver with quad modems and use isdn the ports are above themodem ports.  Have you set the accounting server in the totalcontrol?  If all is set try running radius -x15 and check out theaccounting records.

Hope this helps
Ray

At 05:10 PM 8/6/98 -0400, you wrote:

I can not get my 3 Com TotalControl NAS to show any users in the online tab of Emerald.=A0 It has beenConfigured to Emerlad and RadiusNT the same as my MAX 4048 units and theyall show up fine.=A0 Is there anyhting I am overlooking?=A0 Does the TCsupport the required acct. info for radiusNT to display=20this?
=A0
Any help would be appreciated.
=A0
Derrick
dyoung@thenew.net


..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 2 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Fwd: Emerald & ASP
From: will@greennet.net (Will LaSala)
Date: Fri, 7 Aug 1998 09:43:07 -0400

If you know both you can do both...;-)

Will ,,,=^. .^=,,,
Webmaster
GreenNet® ========================================
"Link Locally ~ Surf Globally©" http://www.greennet.net
Come Play On The Best Quake Server in the Northeast
Serving Eastern Massachusetts and Southern New Hampshire
TEL: 978-363-8898 FAX: 978-363-1225 email:will@greennet.net
===============================================
-----Original Message-----
From: Robert H. Clugston <robert@csnsys.com>
To: emerald@iea-software.com <emerald@iea-software.com>
Date: Thursday, August 06, 1998 3:18 PM
Subject: RE: Fwd: Emerald & ASP

>Will,
> Yea, but its all a matter of whether you know VB scripting or Perl.
>
>
> robert@comstocknet.com
>
>-----Original Message-----
>From: emerald-request@iea-software.com
>[mailto:emerald-request@iea-software.com] On Behalf Of Will LaSala
>Sent: Thursday, August 06, 1998 12:05 PM
>To: emerald@iea-software.com
>Subject: Re: Fwd: Emerald & ASP
>
>You could and I've done alot of different forms for Emerald
>using PERL. It's kinda nice but it is defiantly more work.
>The ASP once you know what you're doing is quick and efficient (provided
>that
>you don't use MS Visual InterDev.'s ActiveX ODBC controls....;-))
>
>Will ,,,=^. .^=,,,
>Webmaster
>GreenNet(r) ========================================
>"Link Locally ~ Surf Globally(c)" http://www.greennet.net
>Come Play On The Best Quake Server in the Northeast
>Serving Eastern Massachusetts and Southern New Hampshire
>TEL: 978-363-8898 FAX: 978-363-1225 email:will@greennet.net
>===============================================
>-----Original Message-----
>From: Robert H. Clugston <robert@csnsys.com>
>To: emerald@iea-software.com <emerald@iea-software.com>
>Date: Thursday, August 06, 1998 1:32 PM
>Subject: RE: Fwd: Emerald & ASP
>
>
>>Dear List,
>> You know I bet you could write the same thing in Perl using mod-perl and
>>MSSQL DBI.
>>
>>
>>-----Original Message-----
>>From: emerald-request@iea-software.com
>>[mailto:emerald-request@iea-software.com] On Behalf Of Will LaSala
>>Sent: Thursday, August 06, 1998 9:08 AM
>>To: emerald@iea-software.com
>>Subject: Re: Fwd: Emerald & ASP
>>
>>I'd happy to do this with a little help from Dale,
>>and a little time.
>>
>>It would be written in ASP form. (maybe alittle perl on someof the harder
>>functions)
>>
>>What'cha think Dale?
>>Will ,,,=^. .^=,,,
>>Webmaster
>>GreenNet(r) ========================================
>>"Link Locally ~ Surf Globally(c)" http://www.greennet.net
>>Come Play On The Best Quake Server in the Northeast
>>Serving Eastern Massachusetts and Southern New Hampshire
>>TEL: 978-363-8898 FAX: 978-363-1225 email:will@greennet.net
>>===============================================
>>-----Original Message-----
>>From: Duane Schaub <dschaub@terraworld.net>
>>To: emerald@iea-software.com <emerald@iea-software.com>
>>Date: Thursday, August 06, 1998 11:16 AM
>>Subject: Re: Fwd: Emerald & ASP
>>
>>
>>>>> I'm trying to access a Emerald SQL db from another server running IIS
>>and
>>>
>>>
>>>Does anyone have web-based emerald access running? If so..... might I
get
>>>a copy pretty please??????? :-)
>>>
>>>Duane.
>>>
>>>
>>>
>>>=========================================================================
=
>>>Duane Schaub, President |Terra World, Inc - Connecting The Planet
>>>Terra World, Inc. |Southeast Kansas' Leading Provider
>>>200 Arco Place, Suite 252 |Flat Fee - Never an hourly Charge
>>>Independence, Kansas 67301 |Where Service is Top Priority!
>>>Voice (316) 332-1616 |http://www.terraworld.net
>>>FAX: (316) 332-1451 |dschaub@terraworld.net
>>>=========================================================================
=
>=
>>
>

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 3 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Fwd: Emerald & ASP
From: will@greennet.net (Will LaSala)
Date: Fri, 7 Aug 1998 09:44:16 -0400

Hmmm
Anyone that runs IIS 3 or higher usually has ASP built in
Other than that perl is just a stronger scripting langue.

Will ,,,=^. .^=,,,
Webmaster
GreenNet® ========================================
"Link Locally ~ Surf Globally©" http://www.greennet.net
Come Play On The Best Quake Server in the Northeast
Serving Eastern Massachusetts and Southern New Hampshire
TEL: 978-363-8898 FAX: 978-363-1225 email:will@greennet.net
===============================================

-----Original Message-----
From: System Operator <sysop@i-star.net>
To: emerald@iea-software.com <emerald@iea-software.com>
Date: Thursday, August 06, 1998 3:35 PM
Subject: Re: Fwd: Emerald & ASP

>And "if" you run ASP
>
>Robert H. Clugston wrote:
>>
>> Will,
>> Yea, but its all a matter of whether you know VB scripting or
>> Perl.
>
>
>Dean Morris

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 4 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Setup of Total Control
From: "Derrick Young" <dyoung@thenew.net>
Date: Fri, 7 Aug 1998 09:55:13 -0400

This is a multi-part message in MIME format.

------=_NextPart_000_000B_01BDC1E9.78E0A190
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I think it might be in the ports but I am not sure where.=20
The unit is a Total Control with 48 X2 ports and 2 PRI connections. I =
have tried setting the ports to start at 1 and 0 with no luck. =20

Derrick
-----Original Message-----
From: Ray Carpenter <ray@systec.com>
To: emerald@iea-software.com <emerald@iea-software.com>
Date: Friday, August 07, 1998 9:38 AM
Subject: Re: Setup of Total Control
=20
=20
The Total Control's support accounting with RadiusNT just fine. =
Have you set the server ports correctly in radius? If you are running a =
netserver with quad modems and use isdn the ports are above the modem =
ports. Have you set the accounting server in the total control? If all =
is set try running radius -x15 and check out the accounting records.
=20
Hope this helps
Ray
=20
At 05:10 PM 8/6/98 -0400, you wrote:=20
=20
I can not get my 3 Com Total Control NAS to show any users in =
the online tab of Emerald. It has been Configured to Emerlad and =
RadiusNT the same as my MAX 4048 units and they all show up fine. Is =
there anyhting I am overlooking? Does the TC support the required acct. =
info for radiusNT to display this?
=20
Any help would be appreciated.
=20
Derrick
dyoung@thenew.net
=20
=20
=20

------=_NextPart_000_000B_01BDC1E9.78E0A190
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">

I think it might be in the ports but =I am not=20sure where.
The unit is a =Total Control=20with 48 X2 ports and 2 PRI connections.  I have tried setting the =ports to=20start at 1 and 0 with no luck. 
 
Derrick
-----Original =Message-----
From:=20 Ray Carpenter <ray@systec.com>
To: =emerald@iea-software.com =<emerald@iea-software.com>=
Date:=20 Friday, August 07, 1998 9:38 AM
Subject: Re: Setup of =Total=20 Control

The Total Control's support accounting =with=20 RadiusNT just fine.  Have you set the server ports correctly in = radius?  If you are running a netserver with quad modems and =use isdn=20 the ports are above the modem ports.  Have you set the =accounting=20 server in the total control?  If all is set try running radius =-x15 and=20 check out the accounting records.

Hope this =helps
Ray

At=20 05:10 PM 8/6/98 -0400, you wrote:
I can not get my 3 Com Total Control =NAS to=20 show any users in the online tab of Emerald.  It has been=20 Configured to Emerlad and RadiusNT the same as my MAX 4048 units =and=20 they all show up fine.  Is there anyhting I am =overlooking? =20 Does the TC support the required acct. info for radiusNT to =display=20 this?
 
Any help=20 would be appreciated.
 
Derrick
dyoung@thenew.net


------=_NextPart_000_000B_01BDC1E9.78E0A190--..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 5 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Fwd: Emerald & ASPFrom: will@greennet.net (Will LaSala)Date: Fri, 7 Aug 1998 09:53:36 -0400May be I should've read all the posts first...;-)Well from my experience ASP works faster on NT then Perl.And it easier to learn and do....but since I learned Perl firstit's know a matter of personal choice.They both do a fine job connecting to database via an ODBC.AS far as tech email ( I think that's what Duane was talking about)I can imagine that there is a need for a tech email and attachment to besent to the incidentreports and for it still to be left in the tech email box.I think I could do this rather quickly but I'd need to make sure that's whatyou're talking about.However if you just talking about customers that signup online,then you can use just the signup ASP form on Dale's ftp site it does exactlythat(p.s. new version next week for pre-existing customers to reconfig theirbrowsers)I would however love to have some type of Web Base Emerald that can doeverything thatthe normal Visual Basic Emerald does.I'd be happy to help people on the list start it (or by the looks of itsince Ed already has a piece of it,I'd be happy to help him finish it).I guess the one deciding factor is Dale.And if he'd let us use his design and move it to the web.What do you think Dale?Will ,,,=^. .^=,,,WebmasterGreenNet® ========================================"Link Locally ~ Surf Globally©" http://www.greennet.netCome Play On The Best Quake Server in the NortheastServing Eastern Massachusetts and Southern New HampshireTEL: 978-363-8898 FAX: 978-363-1225 email:will@greennet.net===============================================-----Original Message-----From: Ed Miller To: emerald@iea-software.com Date: Thursday, August 06, 1998 5:31 PMSubject: Re: Fwd: Emerald & ASP>I re-wrote Dale's input to have people input there data on the web, Works>great. I put a terms page in front and they can not get to the signup page>with out going through the terms page. Anyway, I also rewrote the page for>some other ISP's that I wholesale to. It is only an input page but it gets>the job done. And they can put the info in and have the customer up in a>few mins.>You can have a copy if it will help.>>ed>>-----Original Message----->From: Duane Schaub >To: emerald@iea-software.com >Date: Thursday, August 06, 1998 5:03 PM>Subject: Re: Fwd: Emerald & ASP>>>>At the present, I would far prefer ASP as perl is a pain on IIS and Iwould>>prefer not to run it at this time. Since it would the be an application>>server, the ASP type pages would be far more efficient on the the server>side.>>>>Duane.>>>>>>At 03:19 PM 8/6/98 -0400, you wrote:>>>And "if" you run ASP>>>>>>Robert H. Clugston wrote:>>>>>>>> Will,>>>> Yea, but its all a matter of whether you know VB scripting or>>>> Perl.>>>>>>>>>Dean Morris>>>>>>>>>==========================================================================>>Duane Schaub, President |Terra World, Inc - Connecting The Planet>>Terra World, Inc. |Southeast Kansas' Leading Provider>>200 Arco Place, Suite 252 |Flat Fee - Never an hourly Charge>>Independence, Kansas 67301 |Where Service is Top Priority!>>Voice (316) 332-1616 |http://www.terraworld.net>>FAX: (316) 332-1451 |dschaub@terraworld.net>>===========================================================================>..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 6 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Setup of Total ControlFrom: Ray Carpenter Date: Fri, 07 Aug 1998 14:01:25 -0400The first port starts at 5 so add 5 to the total number of ports. Also ISDN starts at 64 (I think) so you need to config 0 to 112 if youare using isdn.

At 09:55 AM 8/7/98 -0400, you wrote:
I think it might be in the portsbut I am not sure where.
The unit is a Total Control with 48 X2 ports and 2 PRI connections.=A0 Ihave tried setting the ports to start at 1 and 0 with no luck.=A0
=A0
Derrick
-----Original Message-----
From: Ray Carpenter<ray@systec.com>
To:emerald@iea-software.com<emerald@iea-software.com>
Date: Friday, August 07, 1998 9:38 AM
Subject: Re: Setup of Total Control

The Total Control's support accounting with RadiusNT just fine.=A0 Haveyou set the server ports correctly in radius?=A0 If you are running anetserver with quad modems and use isdn the ports are above the modemports.=A0 Have you set the accounting server in the total control?=A0 If allis set try running radius -x15 and check out the accounting=20records.

Hope this helps
Ray

At 05:10 PM 8/6/98 -0400, you wrote:
I can not get my 3 Com Total Control NAS to show any users in theonline tab of Emerald.=A0 It has been Configured to Emerlad and RadiusNTthe same as my MAX 4048 units and they all show up fine.=A0 Is thereanyhting I am overlooking?=A0 Does the TC support the required acct. infofor radiusNT to display this?
=A0
Any help would be appreciated.
=A0
Derrick
dyoung@thenew.net