[Emerald Digest]

emerald-digest-request@iea-software.com
Wed, 5 Aug 1998 00:00:01 -0700

Message 1: Calls Online not updating after reboot
from "Ralph L. Widmar" <rwidmar@netg2.com>

Message 2: Sub Accounts Problem
from Rafael Gomez <rgomez@c-com.net>

Message 3: RE: Calls Online not updating after reboot
from "Ralph L. Widmar" <rwidmar@netg2.com>

Message 4: Re: Radius Not Starting Correctly after Reboot
from Duane Schaub <dschaub@terraworld.net>

Message 5: Re: Radius Not Starting Correctly after Reboot
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 6: RE: Radius Not Starting Correctly after Reboot
from Rafael Gomez <rgomez@c-com.net>

Message 7: Re: Radius Not Starting Correctly after Reboot
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 8: RE: Radius Not Starting Correctly after Reboot
from "Robert H. Clugston" <robert@csnsys.com>

Message 9: Sub Accounts Problem
from Rafael Gomez <rgomez@c-com.net>

Message 10: RV: Sub Accounts Problem
from Rafael Gomez <rgomez@c-com.net>

Message 11: Re: Sub Accounts Problem
from "Josh Hillman" <admin-maillist@talstar.com>

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Calls Online not updating after reboot
From: "Ralph L. Widmar" <rwidmar@netg2.com>
Date: Mon, 3 Aug 1998 23:59:09 -0700

I have been running Emerald 2.1.11 and RadiusNT 2.2 since late 1997 with a
minimum of difficulty.

Today I rebooted my NT server, and when it came back up the calls online in
Emerald were not updating (just blank). When I look at ServerPorts it shows
all of the ports with a null IP address, and when I go to add ports SQL
won't let me.

I am using a Computone PowerRack, and things were working great prior to
the reboot. Any ideas?

Ralph Widmar
MontereyBay.Com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 2 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Sub Accounts Problem
From: Rafael Gomez <rgomez@c-com.net>
Date: Tue, 4 Aug 1998 10:02:46 -0400

Hi all
I'm having edit problems with the subaccount table. When I try to edit =
one account with the Emerald software the system answer is a "error type =
mistmatch 13". I added more space to the database device. Can any of you =
help me with this, please?

Thanks in advance

Rafael Gomez
rgomez@c-com.net

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 3 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: RE: Calls Online not updating after reboot
From: "Ralph L. Widmar" <rwidmar@netg2.com>
Date: Tue, 4 Aug 1998 08:20:30 -0700

Never mind. Come to find out I had a configuration problem in the PowerRack. Doh!

Ralph

On Monday, August 03, 1998 11:59 PM, Ralph L. Widmar [SMTP:rwidmar@netg2.com] wrote:
> I have been running Emerald 2.1.11 and RadiusNT 2.2 since late 1997 with a
> minimum of difficulty.
>
> Today I rebooted my NT server, and when it came back up the calls online in
> Emerald were not updating (just blank). When I look at ServerPorts it shows
> all of the ports with a null IP address, and when I go to add ports SQL
> won't let me.
>
> I am using a Computone PowerRack, and things were working great prior to
> the reboot. Any ideas?
>
> Ralph Widmar
> MontereyBay.Com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 4 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Radius Not Starting Correctly after Reboot
From: Duane Schaub <dschaub@terraworld.net>
Date: Tue, 04 Aug 1998 10:42:46 -0500

At 01:40 PM 8/3/98 -0700, you wrote:
>List,
> After I restart my radius server it does not come up cleaning. I receive no
>error message, but I have to stop & start the radiusNT service in order for
>it to work correctly. Anyone know a solution to this problem?
>

This is a radius problem. If radius is on the same server, then radius
does not retry long enough. I have not found a solution other than waiting
a few minutes and then restarting radiusnt.

Dependencies don't work because SQL says it is started as soon as it starts
executing. I need radius to retry the connection for atleast 5 minutes in
case the sql server is rebooted without a shutdown and the SQL server
starts a cleanup process. My SQL is running on a P166 with 96Mb RAM and
doesn't start real fast.

Duane.

==========================================================================
Duane Schaub, President |Terra World, Inc - Connecting The Planet
Terra World, Inc. |Southeast Kansas' Leading Provider
200 Arco Place, Suite 252 |Flat Fee - Never an hourly Charge
Independence, Kansas 67301 |Where Service is Top Priority!
Voice (316) 332-1616 |http://www.terraworld.net
FAX: (316) 332-1451 |dschaub@terraworld.net
===========================================================================

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 5 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Radius Not Starting Correctly after Reboot
From: "Dale E. Reed Jr." <daler@iea-software.com>
Date: Tue, 04 Aug 1998 12:38:41 -0700

Duane Schaub wrote:
>
> Dependencies don't work because SQL says it is started as soon as it starts
> executing. I need radius to retry the connection for atleast 5 minutes in
> case the sql server is rebooted without a shutdown and the SQL server
> starts a cleanup process. My SQL is running on a P166 with 96Mb RAM and
> doesn't start real fast.

Try 2.5.128 in the /radiusnt/beta directory (yes, its hideen).
I believe it does what you want it to do.

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 6 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: Radius Not Starting Correctly after RebootFrom: Rafael Gomez <rgomez@c-com.net>Date: Tue, 4 Aug 1998 15:44:07 -0400

------ =_NextPart_000_01BDBFBE.BC46F420Content-Type: text/plain; charset="us-ascii"Content-Transfer-Encoding: 7bit

When we are gonna have ths new software version?

Bye

Rafael

-----Mensaje original-----De: Dale E. Reed Jr. [SMTP:daler@iea-software.com]Enviado el: Tuesday, August 04, 1998 3:39 PMPara: emerald@iea-software.comAsunto: Re: Radius Not Starting Correctly after Reboot

Duane Schaub wrote:> > Dependencies don't work because SQL says it is started as soon as it starts> executing. I need radius to retry the connection for atleast 5 minutes in> case the sql server is rebooted without a shutdown and the SQL server> starts a cleanup process. My SQL is running on a P166 with 96Mb RAM and> doesn't start real fast.

Try 2.5.128 in the /radiusnt/beta directory (yes, its hideen).I believe it does what you want it to do.

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com

------ =_NextPart_000_01BDBFBE.BC46F420Content-Type: application/ms-tnefContent-Transfer-Encoding: base64

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

------ =_NextPart_000_01BDBFBE.BC46F420--

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 7 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Radius Not Starting Correctly after RebootFrom: "Dale E. Reed Jr." <daler@iea-software.com>Date: Tue, 04 Aug 1998 13:23:49 -0700

Rafael Gomez wrote:> > When we are gonna have ths new software version?

Are you referring to Emerald or RadiusNT?

> Bye> > Rafael> > -----Mensaje original-----> De: Dale E. Reed Jr. [SMTP:daler@iea-software.com]> Enviado el: Tuesday, August 04, 1998 3:39 PM> Para: emerald@iea-software.com> Asunto: Re: Radius Not Starting Correctly after Reboot> > Duane Schaub wrote:> >> > Dependencies don't work because SQL says it is started as soon as it starts> > executing. I need radius to retry the connection for atleast 5 minutes in> > case the sql server is rebooted without a shutdown and the SQL server> > starts a cleanup process. My SQL is running on a P166 with 96Mb RAM and> > doesn't start real fast.> > Try 2.5.128 in the /radiusnt/beta directory (yes, its hideen).> I believe it does what you want it to do.

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 8 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: Radius Not Starting Correctly after RebootFrom: "Robert H. Clugston" <robert@csnsys.com>Date: Tue, 4 Aug 1998 13:30:15 -0700

>>My SQL is running on a P166 with 96Mb RAM anddoesn't start real fast.I've got a Dual PII 300 with 128MB or Ram and UWSCSI RAID 5 hard drive setupand it still doesn't load correctly.

-----Original Message-----From: emerald-request@iea-software.com[mailto:emerald-request@iea-software.com] On Behalf Of Duane SchaubSent: Tuesday, August 04, 1998 8:43 AMTo: emerald@iea-software.comSubject: Re: Radius Not Starting Correctly after Reboot

At 01:40 PM 8/3/98 -0700, you wrote:>List,> After I restart my radius server it does not come up cleaning. I receiveno>error message, but I have to stop & start the radiusNT service in order for>it to work correctly. Anyone know a solution to this problem?>

This is a radius problem. If radius is on the same server, then radiusdoes not retry long enough. I have not found a solution other than waitinga few minutes and then restarting radiusnt.

Dependencies don't work because SQL says it is started as soon as it startsexecuting. I need radius to retry the connection for atleast 5 minutes incase the sql server is rebooted without a shutdown and the SQL serverstarts a cleanup process. My SQL is running on a P166 with 96Mb RAM anddoesn't start real fast.

Duane.

==========================================================================Duane Schaub, President |Terra World, Inc - Connecting The PlanetTerra World, Inc. |Southeast Kansas' Leading Provider200 Arco Place, Suite 252 |Flat Fee - Never an hourly ChargeIndependence, Kansas 67301 |Where Service is Top Priority!Voice (316) 332-1616 |http://www.terraworld.netFAX: (316) 332-1451 |dschaub@terraworld.net===========================================================================

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 9 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Sub Accounts ProblemFrom: Rafael Gomez <rgomez@c-com.net>Date: Tue, 4 Aug 1998 16:57:09 -0400

Hi all I'm having edit problems with the subaccount table. When I try to edit =one account with the Emerald software the system answer is a "error type =mistmatch 13". I added more space to the database device. Can any of you =help me with this, please?

Thanks in advance

Rafael Gomezrgomez@c-com.net

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 10 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RV: Sub Accounts ProblemFrom: Rafael Gomez <rgomez@c-com.net>Date: Tue, 4 Aug 1998 17:33:05 -0400

Is possible Emerald response the message below because I have two user =with the same password?

Coments, please

Thanks in advance

Rafael Gomez

-----Mensaje original-----De: Rafael Gomez=20Enviado el: Tuesday, August 04, 1998 4:57 PMPara: 'emerald@iea-software.com'Asunto: Sub Accounts Problem

Hi all I'm having edit problems with the subaccount table. When I try to edit =one account with the Emerald software the system answer is a "error type =mistmatch 13". I added more space to the database device. Can any of you =help me with this, please?

Thanks in advance

Rafael Gomezrgomez@c-com.net

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 11 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Sub Accounts ProblemFrom: "Josh Hillman" <admin-maillist@talstar.com>Date: Tue, 4 Aug 1998 18:07:04 -0400

From: Rafael Gomez <rgomez@c-com.net>Is possible Emerald response the message below because I have two user withthe same password?

I don't know what's causing the problem that you're running into, but userscan have the same passwords. It's login/shell names that can't be thesame.

Josh Hillmanhillman@talstar.com

-----Mensaje original-----De: Rafael Gomez Enviado el: Tuesday, August 04, 1998 4:57 PMPara: 'emerald@iea-software.com'Asunto: Sub Accounts Problem

Hi all I'm having edit problems with the subaccount table. When I try to edit oneaccount with the Emerald software the system answer is a "error typemistmatch 13". I added more space to the database device. Can any of youhelp me with this, please?

Thanks in advance

Rafael Gomezrgomez@c-com.net----------