When an Ascend reboots (or is reset in the console) it requests a
bunch of routes and information from RADIUS. Thats all you are seeing
here. Its not a big deal. The Ascend documentation describes this
in the RADIUS supplemental section.
> ________________________________________________________________
>
> Resp Time: 5118 Auth: 6/142 -> 148 Acct: 0/0/0 -> 0
> radrecv: Request from host 2699a001 code=1, id=102, length=59
> User-Name = "route-LI04630-1"
> Password = "Q\367\201/@\304c"
> NAS-IP-Address = 38.153.160.1
> User-Service = Dialout-Framed-User
> rad_authenticate()
> Checking user record PW_PASSWORD type
> authPapPwd
> chkPwd->strvalue is WINNT
> decrypted pwd is ascend
> (WINNT) User:route-LI04630-1 Domain: Password:ascend
> Sending Reject of id 102 to 2699a001 (38.153.160.1)
> Resp Time: 5127 Auth: 6/143 -> 149 Acct: 0/0/0 -> 0
> radrecv: Request from host 2699a001 code=1, id=102, length=59
> User-Name = "route-LI04630-1"
> Password = "Q\367\201/@\304c"
> NAS-IP-Address = 38.153.160.1
> User-Service = Dialout-Framed-User
> rad_authenticate()
> Checking user record PW_PASSWORD type
> authPapPwd
> chkPwd->strvalue is WINNT
> decrypted pwd is ascend
> (WINNT) User:route-LI04630-1 Domain: Password:ascend
> Sending Reject of id 102 to 2699a001 (38.153.160.1)
> Resp Time: 5117 Auth: 6/144 -> 150 Acct: 0/0/0 -> 0
> radrecv: Request from host 2699a001 code=1, id=103, length=59
> User-Name = "route-LI04630-1"
> Password = "\221\246P\300!\337i"
> NAS-IP-Address = 38.153.160.1
> User-Service = Dialout-Framed-User
> rad_authenticate()
> Checking user record PW_PASSWORD type
> authPapPwd
> chkPwd->strvalue is WINNT
> decrypted pwd is ascend
> (WINNT) User:route-LI04630-1 Domain: Password:ascend
> Sending Reject of id 103 to 2699a001 (38.153.160.1)
> Resp Time: 5127 Auth: 6/145 -> 151 Acct: 0/0/0 -> 0
> radrecv: Request from host 2699a001 code=1, id=103, length=59
> User-Name = "route-LI04630-1"
> Password = "\221\246P\300!\337i"
> NAS-IP-Address = 38.153.160.1
> User-Service = Dialout-Framed-User
> rad_authenticate()
> Checking user record PW_PASSWORD type
> authPapPwd
> chkPwd->strvalue is WINNT
> decrypted pwd is ascend
> (WINNT) User:route-LI04630-1 Domain: Password:ascend
> Sending Reject of id 103 to 2699a001 (38.153.160.1)
> Resp Time: 5127 Auth: 6/146 -> 152 Acct: 0/0/0 -> 0
> radrecv: Request from host 2699a001 code=1, id=103, length=59
> User-Name = "route-LI04630-1"
> Password = "\221\246P\300!\337i"
> NAS-IP-Address = 38.153.160.1
> User-Service = Dialout-Framed-User
> rad_authenticate()
> Checking user record PW_PASSWORD type
> authPapPwd
> chkPwd->strvalue is WINNT
> decrypted pwd is ascend
> (WINNT) User:route-LI04630-1 Domain: Password:ascend
> Sending Reject of id 103 to 2699a001 (38.153.160.1)
> Resp Time: 5128 Auth: 6/147 -> 153 Acct: 0/0/0 -> 0
> radrecv: Request from host 2699a001 code=1, id=103, length=59
> User-Name = "route-LI04630-1"
> Password = "\221\246P\300!\337i"
> NAS-IP-Address = 38.153.160.1
> User-Service = Dialout-Framed-User
> rad_authenticate()
> Checking user record PW_PASSWORD type
> authPapPwd
> chkPwd->strvalue is WINNT
> decrypted pwd is ascend
> (WINNT) User:route-LI04630-1 Domain: Password:ascend
> Sending Reject of id 103 to 2699a001 (38.153.160.1)
> Resp Time: 5127 Auth: 6/148 -> 154 Acct: 0/0/0 -> 0
> radrecv: Request from host 2699a001 code=1, id=104, length=59
> User-Name = "route-LI04630-1"
> Password = "\234MH\325\262\317\230"
> NAS-IP-Address = 38.153.160.1
> User-Service = Dialout-Framed-User
> rad_authenticate()
> Checking user record PW_PASSWORD type
> authPapPwd
> chkPwd->strvalue is WINNT
> decrypted pwd is ascend
> (WINNT) User:route-LI04630-1 Domain: Password:ascend
>
> ----------------------------------------------------------
> RadiusNT Mailing List lists@iea-software.com
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com