Connect to your com port the console cable. Put the dipswitch #4 in the
down position then turn off the power, and turn it back on. <<you MUST
have an active console connection>
Fallow the user friendly configuration
PS this is for Netserver PLUS only! and remember to put the dipswich #4
back or else next time you reboot, guess what.... You will need to
start over again.
if all you need to do is add a radius server into the client, use
NETServer Manager plus.
At 10:35 PM 12/18/97 +0100, you wrote:=20
<excerpt><smaller>Hi, I'm in trouble with Netserver too. I've just bought
a Netserver 16 and I cannot do it authentica in no way.
Can you post configuraz=ECtion for your working Netserver, please ??
<bold>Date: </bold>gioved=EC 18 dicembre 1997 22.30
<bold>Subject: </bold>USR (3 Com) Netserver 8/I plus
</smaller></fontfamily> <smaller>Has anyone successfully use RadiusNT
with the USR Netserver 8/I plus?
</smaller> <smaller>I have an USR Netserver 8/I that has been working
with radius for about 5 months now, but I just add a Netserver 8/I plus
yesterday, that fails to authenticate when reaching the protocol
negotiation part after password checks have passed. Any help
VSurf Internet, Inc.