Re: Cisco 5200 and Accounting

Mitchell B. Wagers ( (no email) )
Sat, 13 Dec 1997 14:22:31 -0800

Well, it is a bit confusing, but you actually want Idle-Timeout which is
the Idle-Limit equivelant and they say it is "Session-Timeout"...
Idle-Timeout is listed as 11, not 10, the Absolute Timeout is a
session-limit, where as you get 2 hours and that's it. This also solved
the problem with the Framed-Address, which Cisco needs Framed-IP-Address.
Thanks so much Dale, this really helped!

At 08:28 AM 12/13/97 -0800, you wrote:
>Mitch Wagers wrote:
>>
>> I have posted this several times now...hopefully someone can help.
>>
>> Our Cisco as5248 Authenticates/accounts with a RadiusNT server on a
>> different network block (that part doesn't matter). However, even though
>> Accounting records look great, the Cisco is not reading the Idle-Timeout
>> attribute from the Radius server, people can idle for days! It does,
>> however, read the Framed-Address attribute (I think)...what could be the
>> problem? Wrong attribute?
>
>Check out the link from our website to thier AV list:
>
>http://www.cisco.com/warp/public/732/111/555_pp.htm
>
>There are notes next to Idle-Timeout. I don't quite know
>what they mean by "absolute value".
>
>--
>Dale E. Reed Jr. (daler@iea.com)
>_________________________________________________________________
> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs
> Internet Solutions for Today | http://www.iea-software.com
>
> ----------------------------------------------------------
> RadiusNT Mailing List lists@iea-software.com
>
>