Re: IEA RadiusNT + PM3 question?
Dale E. Reed Jr. ( (no email) )
Tue, 31 Mar 1998 13:56:21 -0800
Zak Wolfinger wrote:
>
> PM3-2 in a remote POP.
> Authenticating with Radius against IEA's Radius NT 1.16.60
>
> Authentication requests only work about 1/2 the time.
> Running Radius NT in debug mode, I see the username/password
> come in to the radius server and see an ACK packet being
> sent back out. According to a Livingston/Lucent tech, the
> problem is that 1/2 the time the ACK packet comes back from
> the main IP assigned to the NIC in the NT server (user is
> authenticated). The rest of the time the ACK packet comes
> back showing a secondary address on the NT server (user is
> NOT authenticated since the ACK is coming from an "unknown"
> server).
>
> I have the same versions of NT (4.0 SP3) and IEA's Radius
> (1.16.60) and the dictionairy file (1.6) an another server
> and it works fine there. The ACK packets always show that
> they are coming from the MAIN IP address assigned to the
> NIC.
>
> I have no idea what would cause this behavior. Can anyone
> clue me in?
Are all of the IPs assigned to the NIC in the same class c?
Its rather difficult to really get to the bottom of the
issue without seeing a full "ipconfig /all" along with
the IPs your terminal server is configured to use.
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com