Penny
> -----Original Message-----
> From: Zak Wolfinger [mailto:zak@cyberlink.com]
> Sent: Monday, 30 March, 1998 4:48 PM
> To: ntisp
> Subject: IEA RadiusNT + PM3 question?
>
>
> Here is the scenario:
>
> PM3-2 in a remote POP.
> Authenticating with Radius against IEA's Radius NT 1.16.60
>
> Authentication requests only work about 1/2 the time.
> Running Radius NT in debug mode, I see the username/password
> come in to the radius server and see an ACK packet being
> sent back out. According to a Livingston/Lucent tech, the
> problem is that 1/2 the time the ACK packet comes back from
> the main IP assigned to the NIC in the NT server (user is
> authenticated). The rest of the time the ACK packet comes
> back showing a secondary address on the NT server (user is
> NOT authenticated since the ACK is coming from an "unknown"
> server).
>
> I have the same versions of NT (4.0 SP3) and IEA's Radius
> (1.16.60) and the dictionairy file (1.6) an another server
> and it works fine there. The ACK packets always show that
> they are coming from the MAIN IP address assigned to the
> NIC.
>
> I have no idea what would cause this behavior. Can anyone
> clue me in?
>
> Zak Wolfinger - zak@cyberlink.com
> Systems Admin - CyberLink, Inc.
> (888) PLUG-IN-2
>
>
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com
>