Radius users config

Karl Hamson ( (no email) )
Tue, 3 Mar 1998 11:44:01 +0000

I have finally have NT 4.0 to authenticate off our Linux Radius 2.0
server... Thanks to Kevin Ingram and Dale E. Reed Jr. for their input.

Now on to the next problem... It seems that although a user can
authenticate, incorrect or incomplete information reguarding services
is being sent to NT by the radius server. Would anybody care to share
their default radius user entry that works with NT RAS 4.0 and RRAS
with the hotfix.

Here's what I have so far... (it works with our other terminal servers)

DEFAULT2 Auth-Type = System
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Adress =,
Framed-Routing = None,
Filter-Id = "std.ppp"
Framed-MTU = 600,
Framed-Compression = Van-Jacobson-TCP-IP
Session-Timout = 14400,
Idle-Timeout = 960,
Port-Limit = 1

A Windows 95 dial-up client with all it's dial up settings
set to server assigned(our typical configuration) reports
via winipcfg that:
DNS is properly relayed (the only field).
IP address is given as (seems to be the Framed-IP-Adresss
Default Gateway is empty.

Any help would be appreciated...

Karl Hamson / khamson@sage.net / Sage Networks Inc.