Re: MRTG on NT

Kurt A. Butzin, DDS ( (no email) )
Sun, 1 Feb 1998 15:08:12 -0500

Using 1:public@ i get the following:

Microsoft(R) Windows NT(TM)
(C) Copyright 1985-1996 Microsoft Corp.


c:\Perl\bin>perl c:\mrtg-2.5.1\mrtg c:\mrtg-2.5.1\mrtg.cfg
Rateup ERROR: Chdir to E:\inetpub\wwwroot\Molarnet failed ...

PROBLEM: rateup died from Signal 0
with Exit Value 1 when doing router 'snoopy'
If this happens all the time,
you should probably investigate the cause. :-)

Using 0:public@ i get the following:

c:\Perl\bin>perl c:\mrtg-2.5.1\mrtg c:\mrtg-2.5.1\mrtg.cfg
SNMP Error:
Received SNMP response with error code
error status: noSuchName
index 1 (OID:
SNMPv1_Session (remote host: "" [].161
community: "public"
request ID: 1546827117
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
SNMPGET: Failed to reach target: "0:public@". I tried multiple


Any other suggestions? I working with a globtrotter 60 router.


Kurt A. Butzin, DDS Molarnet Technologies, Inc
President 1936 Bay Street Saginaw, MI 48602 (517) 249-4638

Authorized iPSwitch WebVar (

-----Original Message-----
From: Mitchell B. Wagers <>
To: <>
Date: Sunday, February 01, 1998 9:34 AM
Subject: Re: MRTG on NT

>Yeah, this means your router doesn't understand your request, "NoSuchName."
>Try just using a simple target, like:
>Target[yourrouter]: 1:public@ip.of.your.router