------=_NextPart_000_00B8_01BD0B43.6B08DFE0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I could fix the problem. It was the ODBC-driver. IIS 4.0 installed a =
new ODBC driver for ACCESS. After I removed the old driver (which worked =
well under IIS 3.0) and reinstalled my datasources with the new driver =
everything is working well. Maybe it was a language problem - my old =
driver was german also IIS 3.0.
Btw. I don't think that reinstalling service pack 3 is necessary. I =
didn't do that and everything runs well.
As you mentioned, I first removed IIS 3.0 and then installed IIS 4.0. =
It was a lot of work, because all the permissons on my 25 virtual =
Frontpage webs were killed. Thanks M$ for that good upgrade procedure!
Oh, I forgot: Indexserver is running on a PDC. It just took about 1 hour =
for indexing about 20.000 documents on a dual PPRO 200 / 128 MB. So I =
would recommend first to stop the indexserver and then configure only =
those directories you really need.
-----Urspr=FCngliche Nachricht-----
Von: Network Operations <noc@apc.net>
An: ntisp@emerald.iea.com <ntisp@emerald.iea.com>
Datum: Mittwoch, 17. Dezember 1997 20:44
Betreff: Re: IIS 4.0 and ASP
=20
=20
Have you re-installed Service Pack 3 and all the hotfixes?=20
=20
Did you install over the top of 3.0 or start fresh. I've seen a lot =
of discussion in this group noting that upgrading 3.0 simply does nto =
work, that you have to start fresh.
=20
Tom M.
=20
At 12:56 PM 12/17/97 +0100, you wrote:=20
>>>>
=20
Last night I installed IIS 4.0 on my production server. Took me =
half the nihgt because I made some mistakes, but this is another story. =
My major Problem is that all my ASP - pages with access to Database (MS =
ACCESS) don't work. All these pages worked without any problems on IIS =
3.0. Now if I ran these pages inetinfo.exe fails with a dr. watson. If I =
run this website as an isolated process I get the following error in the =
browser: "The server has reached the maximum recovery limit for the =
application during the processing of your request. Please contact the =
server administrator for assistance."
=20
I feel that this has to do with transaction server, but I don't =
know where to start.
=20
Please help!
=20
J=FCrgen
=
-----------------------------------------------------------------
* Juergen Weiss .................... email: =
<mailto:weiss@wwweiss.de>weiss@wwweiss.de *
* Weiss Internet Services .......... Telefon +49 6263 45036 *
* Am langen Weinberg 15, 74862 Binau Telefax +49 6263 45037 *
=20
=20
<<<<
=20
=20
=20
=20
=20
---------------------------------------------------------- NTISP =
Mailing List listserver@emerald.iea.com
=20
------=_NextPart_000_00B8_01BD0B43.6B08DFE0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
------=_NextPart_000_00B8_01BD0B43.6B08DFE0-------Ursprüngliche=20 Nachricht-----Have you re-installed Service Pack 3 and all =the=20 hotfixes?
Von: Network Operations <noc@apc.net>
An: ntisp@emerald.iea.com =<ntisp@emerald.iea.com>
Datum:=20 Mittwoch, 17. Dezember 1997 20:44
Betreff: Re: IIS 4.0 =and=20 ASP
Did you install over the top of 3.0 or start =fresh. I've=20 seen a lot of discussion in this group noting that upgrading 3.0 =simply does=20 nto work, that you have to start fresh.
Tom M.
At =12:56 PM=20 12/17/97 +0100, you wrote:
>>>>
Last night I installed IIS 4.0 on my =production=20 server. Took me half the nihgt because I made some mistakes, but =this is=20 another story. My major Problem is that all my ASP - pages with =access=20 to Database (MS ACCESS) don't work. All these pages worked =without any=20 problems on IIS 3.0. Now if I ran these pages inetinfo.exe fails =with a=20 dr. watson. If I run this website as an isolated process I get =the=20 following error in the browser: "The server has reached the =maximum=20 recovery limit for the application during the processing of your = request. Please contact the server administrator for=20 assistance."<<<<
/smaller>
I feel that this =has to do=20 with transaction server, but I don't know where to=20 start.
/smaller>
Please =help!
/smaller>
Jürgen
------------------------=-----------------------------------------
*=20 Juergen Weiss .................... email:=20 <mailto:weiss@wwweiss.de>weiss@wwweiss.de *
* Weiss =Internet=20 Services .......... Telefon +49 6263 45036 *
* Am langen =Weinberg 15,=20 74862 Binau Telefax +49 6263 45037=20 =*
/smaller>
=----------------------------------------------------------=20 NTISP Mailing List =listserver@emerald.iea.com