At 10:57 PM 2/17/98 -0500, you wrote:
>I set the ports to 120, should I also set modems to 120? After I made the
>change I could not see the ISDN users currently logged in, but then would it
>show up for sessions already made? I did restart Emerald after I made the
>changes.
>
>Thanks, Mike
>DCS Online
>
>-----Original Message-----
>From: Laslo Orto <Laslo@cpol.com>
>To: emerald@emerald.iea.com <emerald@emerald.iea.com>
>Date: Tuesday, February 17, 1998 10:20 PM
>Subject: Re: ISDN callers On-Line
>
>
>>The USR TC reports the ISDN ports starting from 67, in emerald admin
>>specify that you have 120 ports on the TC and they will show up
>>
>>At 10:09 PM 2/17/98 -0500, you wrote:
>>>I'm running a USR Total Control ENH with RadiusNT & Emerald. I noticed
>>>recently that while all analog connections show up on the Emerald On-Line
>>>screen, none of the ISDN callers are showing up. So when I thought I had
>x
>>>number of users online I actually had several more because of the ISDN
>>>callers. The only way I can be sure of how many channels are being used
>is
>>>to telnet into my TC netserver and do a show sessions and start counting.
>>>
>>>Does anybody know if this can be fixed?
>>>
>>>Thanks, Mike
>>>DCS Online
>>>
>>>
>>> ----------------------------------------------------------
>>> Emerald Mailing List listserver@emerald.iea.com
>>>
>>
>>
>> ----------------------------------------------------------
>> Emerald Mailing List listserver@emerald.iea.com
>>
>
>
> ----------------------------------------------------------
> Emerald Mailing List listserver@emerald.iea.com
>