Re: ISDN callers On-Line

Michael A. Davis Jr. ( (no email) )
Tue, 17 Feb 1998 22:57:26 -0500

I set the ports to 120, should I also set modems to 120? After I made the
change I could not see the ISDN users currently logged in, but then would it
show up for sessions already made? I did restart Emerald after I made the
changes.

Thanks, Mike
DCS Online

-----Original Message-----
From: Laslo Orto <Laslo@cpol.com>
To: emerald@emerald.iea.com <emerald@emerald.iea.com>
Date: Tuesday, February 17, 1998 10:20 PM
Subject: Re: ISDN callers On-Line

>The USR TC reports the ISDN ports starting from 67, in emerald admin
>specify that you have 120 ports on the TC and they will show up
>
>At 10:09 PM 2/17/98 -0500, you wrote:
>>I'm running a USR Total Control ENH with RadiusNT & Emerald. I noticed
>>recently that while all analog connections show up on the Emerald On-Line
>>screen, none of the ISDN callers are showing up. So when I thought I had
x
>>number of users online I actually had several more because of the ISDN
>>callers. The only way I can be sure of how many channels are being used
is
>>to telnet into my TC netserver and do a show sessions and start counting.
>>
>>Does anybody know if this can be fixed?
>>
>>Thanks, Mike
>>DCS Online
>>
>>
>> ----------------------------------------------------------
>> Emerald Mailing List listserver@emerald.iea.com
>>
>
>
> ----------------------------------------------------------
> Emerald Mailing List listserver@emerald.iea.com
>