Re: Cannot Limit Calls Based on DNIS # and Multi POPs

Rudy Komsic ( (no email) )
Tue, 20 Jan 1998 21:39:04 -0500

sorry for repost... but I did not see any reply to this.

-----Original Message-----
From: Rudy Komsic <rudyk@cyberglobe.net>
To: RadiusNT@iea-software.com <RadiusNT@iea-software.com>
Date: January 8, 1998 1:29 AM
Subject: Bug: Cannot Limit Calls Based on DNIS # and Multi POPs

>Hello,
>
>Just to give out our basic Layout on how we are currently using our new
>Chassis system to limit Theft of Service, we are configured with ISDN PRI
>Connections (47 Lines per chassis) and we have 3 Phone numbers for our
>clients to call in on. Line 1 is for up to 33.6k Only, Line 2 is for 33.6k
>and X2, and Line 3 is for 33.6k, X2, and ISDN. Our USR Total Control
>Chassis have a feature that allows us to setup DNIS Pre Initialization
>before pickup so that we can limit the speed for our clients.
>
>The Problem is how do I set the Radius Attribute NAS-Port-DNIS for a
>specific group login to the DNIS number the client is ONLY to dial. For
>Example I tried the following to see if it would limit login to the
>specified DNIS #:
>
>Framed-Protocol: PPP
>Framed-Address: 255.255.255.254
>Session-Timeout: 28800
>Idle-Timeout: 1200
>NAS-Port-DNIS: 0001 (Line #1 for 33.6k only)
>
>Now, if I called on line #2, the NAS returns the Info to the RadiusNT
>software, is has NAS-Port-DNIS as 0002 but I discovered that RadiusNT has
NO
>support to check to see if NAS-Port-DNIS is the one the client is allowed
to
>use. Can you please tell me how to do this feature? If this feature is
not
>available, could you please add this feature in ASAP so that we can
simplify
>with Multipurpose Chassis?
>
>Also, can you add support for Multiple DNIS numbers as well for MultiPOPs.
>
>Thank you for your prompt reply.
>
>PS: BTW, there may be a bug with USR's Total Control Modem Code 5.6.7 and
>Netserver Code 3.6.28 with RadiusNT. When we establish a connection via a
>Radius account, it works but when we try to login a user via the NT User
>Manager account, it fails. This currently works with the older code but
the
>newer code fails.
>
>----
>Rudy Komsic
>President - Cyberglobe Communications Inc.
>4996 Place de la Savane, Montreal, Quebec, H4P 1Z6, Canada
>E-Mail: rudyk@cyberglobe.net Phone: (514)342-3883 Fax:(514)342-5139
>
>