I am anxious awaiting RadiusNT 2.2 and have feature request to make
Livingston has a connect rate check:
6.The Connect-Rate check-item is supported in RADIUS 2.0.1.
•If Connect-Rate is specified as a check-item, that user will fail
authentication if he attempts to connect to a PortMaster 3 at a faster
downstream connect speed than that. The use of this check-item requires the
PortMaster to send Connect-Info in the Access-Request, so it requires a
PortMaster 3 running ComOS 3.5.1 or later. If Connect-Info is not present
in the Access-Request packet, the Connect-Rate check-item is ignored. The
following example would allow a user to connect at 28800bps but not at
33600 or 56000.
user Auth-Type = System, Connect-Rate = 28800
Service-Type = Framed-User,
Framed-Protocol = PPP
Very useful for those of us who would like to charge users for 56k
connections with out maintaining dual modem pools.
Or can I simply add this to an existing setup by updating the dictionary?
Mike Kuzenko
NetDotCom Internet Services
330-369-3617
mikek@netdotcom.com