Re: Radius NT Accounting Problems
Dale E. Reed Jr. ( (no email) )
Tue, 10 Jun 1997 16:59:52 -0700
isp@digitalexp.com wrote:
>
> I have installed RadiusNT .60 on an NT 4.0 Server and have designated this
> as our accounting server (only) in ODBC Access mode, using the Radius7 file
> which came with the RadiusNT software.
>
> Authentication is being done on two seperate machines while accounting is
> only passed to this machine.
>
> Problem:
>
> Running RadiusNT as a service with Option: 16 causes no ill side effects at
> all, however as soon as Option 18 is run a DR Watson report is generated
> (exeception error). I have checked the Servers table to insure all the data
> contained is correct, as well as the ServerPorts table. All 34 of our Max
> 4000's have been configured properly to use this machine as it's accounting
> server and "secret" has been entered correctly everywhere (as is evident
> with Option 16 working fine).
Option 16 (MS Access mode) is not required anymore.
Option 2 (manual updates) is a known problem in 1.16.60. Either
downgrade to 1.16.49 or use RadiusNT 2.2 when it is available.
-- Dale E. Reed Jr. (daler@iea.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.emerald.iea.com