Sorry I am a little confused here. How can check the route you mentioned here
"Do you have a route on the internet side of the NT machine"
Thanks a lot for your time!
At 08:53 AM 6/13/97 -0500, you wrote:
>Do you have a route on the internet side of the NT machine that says
>packets comming from the internal network originate from the internet
>nic?
>
>> ----------
>> From: sun@larkom.net[SMTP:sun@larkom.net]
>> Reply To: ntisp@emerald.iea.com
>> Sent: Thursday, June 12, 1997 9:03 PM
>> To: ntisp@emerald.iea.com
>> Subject: RE: auto switchers
>>
>> Hi, Everyone:
>>
>> I am trying to use NT as a router
>>
>> I installed to NICs in the router computer running WinddowsNT4.0.
>> I configured two NICs into different IP address,
>> on internet side I set the IP address and default gateway
>> on internal side I set the Internal IP and left default gateway as
>> blank
>> I checked Enable IP forwarding.
>>
>> then, I hook up the internal NIC to a hup, a windows95 computer was
>> hooked with
>> that hup. From the windows95, I can ping the two NICs ip address on
>> Router
>> computer with no problem, I have no difficulty to ping windows95 back
>> from
>> NT4.0.
>>
>> But when I try to tracert other computer from the Windows95 computer,
>> it will
>> only go to NT4.0 then stop.
>>
>> Can anyone help me out. Tnanks in advance!
>>
>>
>> Liankui Sun
>> problem.
>>
>>
>>
>> the internal IP address
>>
>> 192.168.255.0 - 192.168.255.255
>>
>>
>>
>> ----------------------------------------------------------
>> NTISP Mailing List listserver@emerald.iea.com
>>
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com
>
>