There must be an attribute I have set incorrectly in the MAX as best I =
can figure.
Help!
-----Original Message-----
From: Brian Krabach [SMTP:krabach@glasscity.net]
Sent: Monday, June 09, 1997 6:44 AM
To: 'Mark A. Knight'; Emerald Mail-List (E-mail); NTISP Mail-List =
(E-mail)
Subject: RE: Long Authentification Delay Time
Mark,
Which version of software are you using on the MAX? Apparently, Ascend =
fixed the problem that caused this in version 5.0Ap8 and higher...
**********************
Brian Krabach
Vice President Engineering
GlassCity Internet, Inc.
http://www.glasscity.net
krabach@glasscity.net
***********************
-----Original Message-----
From: Mark A. Knight [SMTP:RadAdmin@Express-Connect.Net]
Sent: Friday, June 06, 1997 1:09 AM
To: Emerald Mail-List (E-mail); NTISP Mail-List (E-mail)
Subject: Long Authentification Delay Time
Hello everyone,
I was wondering if anyone else has in the past, or currently does, =3D
experience extended authentication periods running Emerald with RadiusNT =
=3D
is ODBC only mode. In other words, when I have a user dial-in, the =3D
modem on my MAX connects immediately, but, it can take up to a minute to =
=3D
verify the user name and password. This is happening when this is next =
=3D
to no traffic on the network. That sure seems to be a long time to me! =
=3D
Especially when I have the MAX connected through a 10bastT switch =3D
instead of a hub. The switch then connects to the server via a =3D
100baseTX hub.
Any suggestions?
NT 4.0 (Build 1381-SP3) - MS SQL Server 6.5 - RadiusNT V 1.16.60
Emerald Client 2.1.8 - Emerald Admin 2.1.0 - Serv-U V2.2 32 Bit
MailSite Version 1.2.2 - NAS Ascend MAX 4000
Mark A. Knight - PC Express, Inc=3D20
RadAdmin@Express-Connect.Net