----------
> From: Dale E. Reed Jr. <daler@iea.com>
> To: RadiusNT@emerald.iea.com
> Subject: Re: radius died
> Date: Tuesday, April 29, 1997 2:38 AM
>
> Troy Hall wrote:
> >
> > ----------
> > > From: Dale E. Reed Jr. <daler@iea.com>
> > > To: RadiusNT@emerald.iea.com
> > > Subject: Re: radius died
> > > Date: Tuesday, April 29, 1997 12:27 AM
> > >
> > > Troy Hall wrote:
> > > >
> > > > I came in this morning to find the servers running extremely slow.
A
> > > > thorough search revealed nothing out of the ordinary, other than I
was
> > not
> > > > resolving one of my normal customers.
> > > > I restarted dns and the problem went away, but not the slowness.
> > > > Then one of my customers called and stated that they could'nt
upload a
> > file
> > > > to me as it was getting killed in mid upload. And that the xfer
rate
> > was
> > > > less than 1k.
> > > >
> > > > Then later tonight I found out that radius has stop authenticating
> > > > customers. Only customers that are in the PM2E are being allowed
on
> > the
> > > > server. Restarting radius and/or rebooting did not cure this.
> > >
> > > This is like getting out a magnet to find a needle. :(
> >
> > And I bet my answers won't help much :-{
> >
> > > Anytime you have RadiusNT problems, you need to post ATLEAST the
> > > following. Some people have even put it into their sig, although I
> > > doubt most people find it useful. :)
> >
> > Sorry, did'nt know. I have printed your instructions for next time :-}
> >
> > >
> > > Version of RadiusNT (-v) and options.
> > > -x15 debug of the problem (authentication)
> > > Anything special about your install (ODBC driver type, etc).
> >
> > I'm using ver 1.16.nt 95.01.06 NOSHADOW windowsNT
> > when I type radius -x15 from the command line, it says, its loading....
> > using port 1645. authbind: NO ERROR
> >
> > which would seem to indicate that all is well, yet they cant log
in...:-{
> >
> > I'm sure I was of no help, but is all I know.
>
> This means RadiusNT isn't binding to port 1645. Typically this is
> caused
> by having another one running. I would highly recommend you updating to
> RadiusNT 1.16.60. You can get it form www.emerald.iea.com.
>
> --
> Dale E. Reed Jr. (daler@iea.com)
> _________________________________________________________________
> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs
> Internet Solutions for Today | http://www.emerald.iea.com
>
> ----------------------------------------------------------
> RadiusNT Mailing List listserver@emerald.iea.com