Re: Obj: Re: Portmaster not using Radius

Reid ( reid@cyberproducts.com )
Wed, 02 Apr 1997 14:14:08 -0500

Nicolas SPORN wrote:
>
> if you go on the pm with telnet, if you do a
> sh global
> does the system says
> ==================
> Command> sh glo
> System Name:
> Default Host: 0.0.0.0
> Alternate Hosts:
> IP Gateway: YOUR IP GATEWAY a.b.c.1
> Gateway Metric: 1
> Default Route: Quiet (Off)
> Name Service: DNS
> Name Server: YOUR DNS a.b.c.5
> Domain: YOUR DOMAIN toto.com
> Telnet Access Port: 23
> Loghost: 0.0.0.0
> Assigned Address: YOUR IP FOR THE POOL
> RADIUS Server: YOUR RADIUS SERVER a.b.c.4
> Alternate Server: 0.0.0.0
> Accounting Server: YOUR RADIUS SERVER same as above
> Alt. Acct. Server: 0.0.0.0
> ISDN Switch Type: VN4
> Disabled Modules: IPX
> Command>
> ==================
> You shpould have radius _and_ accounting connected to the same ip

I've tried it with and witout the accounting IP address set. Same
problems either way.

>
> > Nicolas SPORN wrote:
> > >
> > > If a user connects to the PM, do you see anything on the radius window ?
> > Yes. Everything seems to work. The portmaster won't use the Ack from
> > RadisuNT.
> > It works fine with radlogin.
> >
> >
> > --
> > Real programmers don't comment their code.
> > If it was hard to write, it should be hard to read.
> >
> > ----------------------------------------------------------
> > RadiusNT Mailing List listserver@emerald.iea.com
> >
>
> ----
> _\\|//_
> (-o-O-)
> ---------------------------------------ooO-(_)-Ooo----
> Nicolas SPORN Tel : 03.87.76.05.15
> i2M - WebMaster Fax : 03.87.75.48.20
> 1-3 rue Paul Bezanson
> 57000 METZ Mail : nsporn@i2m.fr
> France Web : http://www.i2m.fr
> ------------------------------------------------------

-- Real programmers don't comment their code.If it was hard to write, it should be hard to read.