------=_NextPart_000_01BC3315.171C6D40
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
----------
> From: Jeffrey Betts <jbetts@ccaccess.net>
> To: RadiusNT Support <Radiusnt@iea.com>
> Subject: Problems with ISDN
> Date: Monday, March 17, 1997 8:04 PM
>
>
> First of all here is my hardware setup
>
> PM2er with 20 modems and 5 BRI
> cmos 3.5
>
> Customer login is "climark2" customer is using
> a motorola bitsurfer . Customer has 128k connection.
> If the customer connects at 64k all is OK. When the
> customer tries to connect at 128k the first line establishes
> fine the second line does not establish. If I look at the port
> through the portmaster it keeps showing "connecting"
> My radiusnt is in dos mode with the x15 parameter
> the error I get is.
>
> "user climark2 is allready logged in 1 time(s)"
>
> Now here is the wierd part we had a conferance call
> with a tech from motorola . He is using the exact same
> ISDN modem with the exact same settings.
> He can log in fine on both lines. No problems at all.
> The only differance is he is calling long distance through
> a different provider. The tech thinks it is caused by
> the way Pac Bell is routing the lines.
> Has anyone heard about anything like this ?
> I sure could use some ideas
>
> Thanks
> Jeff Betts
> Jbetts@ccaccess.net
Jeff,
You might want to turn off concurrency control.
Rusty Conover
RConover@wyellowstone.com
------=_NextPart_000_01BC3315.171C6D40
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
----------
> From: =Jeffrey Betts <jbetts@ccaccess.net>
> To: RadiusNT Support <Radiusnt@iea.com>
> Subject: Problems with ISDN
> Date: =Monday, March 17, 1997 8:04 PM
>
>
> First of all =here is my hardware setup
>
> PM2er with 20 modems and 5 =BRI
> cmos 3.5
>
> Customer login is = "climark2" customer is using
> a motorola =bitsurfer . Customer has 128k connection.
> If the customer =connects at 64k all is OK. When the
> customer tries to connect at =128k the first line establishes
> fine the second line does not =establish. If I look at the port
> through the portmaster it keeps =showing "connecting"
> My radiusnt is in dos mode with =the x15 parameter
> the error I get is.
>
> ="user climark2 is allready logged in 1 time(s)"
> =
> Now here is the wierd part we had a conferance call
> =with a tech from motorola . He is using the exact same
> ISDN =modem with the exact same settings.
> He can log in fine on both =lines. No problems at all.
> The only differance is he is calling =long distance through
> a different provider. The tech thinks it =is caused by
> the way Pac Bell is routing the lines.
> Has =anyone heard about anything like this ?
> I sure could use some =ideas
>
> Thanks
> Jeff Betts
> Jbetts@ccaccess.net
Jeff,
You might want to turn off concurrency =control.
Rusty Conover
RConover@wyellowstone.com