This string should give you all the info your looking for.
Depending on your brand of modem, you may get errors on some returns.
If you do, just drop of the i? for the ones that you get errors on.
ati3 thru ati5 will probably give you what your looking for but try them
all either collectively or individually. Hope you got a book with those
modems.
Make sure you set the modem type in the portmaster.
if you type "show s0" the modem should say "configured".
Don Swett
dswett@ilnk.com
Interlink America
http://www.ilnk.com
Techsupport@ilnk.com
Postmaster@ilnk.com
webmaster@ilnk.com
----------
> From: Jared Groves <jgroves@de-inc.com>
> To: ntisp@emerald.iea.com
> Subject: Re: Modem Hangup
> Date: Monday, May 26, 1997 6:51 PM
>
> How can I check the NVRAM from the Port Master? Do I have to disconnect
> the modem etc and hook it up to a terminal, or can I do it from the
> Terminal Server? Thanks :)
>
>
>
> ----------
> > From: Kent Runyan <admin@konnections.com>
> > To: ntisp@emerald.iea.com
> > Subject: Re: Modem Hangup
> > Date: Monday, May 26, 1997 4:17 PM
> >
> > What modems are you using? If they are USR Sportsters, you need to
make
> > sure they have been initialized properly. Check the NVRAM in the two
> that
> > answer and compare the settings to the rest of them.
> >
> >
> >
> > Kent Runyan, Operations Manager
> > Konnections, Inc.
> > 2650 Washington Blvd. Ste 208
> > Ogden, UT 84401
> > 801-621-8511
> > http://www.konnections.com
> >
> > ----------
> > > From: Jared Groves <jgroves@de-inc.com>
> > > To: ntisp@emerald.iea.com
> > > Subject: Modem Hangup
> > > Date: Monday, May 26, 1997 11:15 AM
> > >
> > > I am really stuck!!!! I just converted my whole system from a lame
> > > multiport cyclades board over to a livingston pm2e....I had run some
> > trials
> > > before I switched all of my lines over....however...now that I've
done
> > the
> > > switch...only 2 modems will answer. Number 1 and Number 3....all of
> the
> > > rest will pick up and hangup immeaditly...without sending any kind of
> > > handshake....ANY help at all toward this would be appreciated...I am
in
> a
> > > bind and none of my users can get online!
> > >
> > >
> > >
> > >
> >
>
----------------------------------------------------------------------------
>
> >
> > > ----------------------
> > > Jared Groves
jgroves@de-inc.com
> > > System Administrator
> > > Digital Entropy
> > http://www.de-inc.com
> > >
> > >
> > > ----------------------------------------------------------
> > > NTISP Mailing List listserver@emerald.iea.com
> > >
> >
> > ----------------------------------------------------------
> > NTISP Mailing List listserver@emerald.iea.com
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com