Re: support of USR Netserver?

Tom Bilan ( )
Sun, 11 May 1997 13:18:21 -0400

Take the T1/PRI card out of the far left slot and swap it with the
last modem. This will make your modems number from 1-48 instead of

This works, I did it with 3 TCs so far.

You'll have to use TC manager to re-assign the modems back to the T1
channels but the whole process should take 1/2 -> 1 hour / netserver.


At 04:51 PM 5/9/97 -0500, you wrote:
>My Total Control Hub starts at 0 (the console), but the modems don't actually
>start until port 5.
> ----
>From: Grove Heacock <>
>Date: Friday, May 09, 1997 4:07 PM
>Subject: Re: support of USR Netserver?