Re: <""> problem
Bill Webb ( email@example.com )
Mon, 31 Mar 1997 12:27:38 -0800 (PST)
> I experienced a strange problem with RadiusNT.
> I am not sure if it is from RadiusNT or from NAS (Telebit Netblazer LS-2PT).
> I have for PPP service the followings (in Emerald):
> - User-Service Framed-User
> - Framed-Service PPP
> - Idle-Timeout 600
> On the NAS I have a default-ppp interface with no commands.
> On connecting to the NAS with user <avn> syslog reports:
> avn:activate ppp"" dynamic timeout avn-ppp 600; logout
> The <""> confuse the NAS and it reply <could not found either avn-ppp" or default-ppp"> and it kicks out the user.
> Only for Idle-Timeout appear "" , for other command only <> appear.
> Setting a default-ppp" interface work !
> So who is the problem: RadiusNT or the NAS?
It would appear to be a NetBlazer problem.
What version of the code are you running?
Do you have any patches installed?
You may be able to work around the problem by putting a timeout on the
default-ppp interface if you have the same timeout for all users.
Bill Webb. Telebit NetBlazer Software Development Group
Email: firstname.lastname@example.org WWW: http://www.telebit.com/~webb
-- above opinions are my own, not necessarily those of my employer --