------=_NextPart_000_0001_01C24AA2.EDB2A360
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
John,
Here is what I did:
* I added the two RAS devices in the "Servers" tab
* I gave it 192 ports with 192 modems each, but don't know really
how many there are (still trying to find out)
* In "Server Ports" this is set to "ALL", but I don't have
anything else in. I don't have the IP address set?
* I created the group that would be assocaited with these servers
* I put in the filters for the group. They won't stay in the
correct order though.
Let me know if this helps. If you would like we can go screen by screen
and help each other out. Let me know and I can give you my number off
list.
Todd
-----Original Message-----
From: emerald-request@iea-software.com
[mailto:emerald-request@iea-software.com] On Behalf Of John Kern
Sent: Friday, August 23, 2002 9:42 AM
To: emerald@iea-software.com
Subject: RE: [Emerald] Qwest
Todd,
How did you set up your qwest ports?
John
*********** REPLY SEPARATOR ***********
On 8/23/2002 at 9:23 AM Todd H. Simmons wrote:
I have the exact opposite problem. I can't see the customers online,
but can the RADLOG problems.
todd
-----Original Message-----
From: emerald-request@iea-software.com
[mailto:emerald-request@iea-software.com]On Behalf Of John Kern
Sent: Friday, August 23, 2002 8:34 AM
To: emerald@iea-software.com
Subject: [Emerald] Qwest
We are using the qwest wholesale ports with Emerald/RadiusNT 2.5.
We can see the users in the online screen just fine, but the problem is
when a user fails to authenticate, we cannot see them in the radlog
screen to see why they failed to log on.
All our local ports work in the radlog, but qwest ports do not.
Any ideas on how to get this to work?
Thanks,
John
------=_NextPart_000_0001_01C24AA2.EDB2A360
Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">