Re: [NTISP] Radius session limits

Dave P. ( (no email) )
Tue, 30 May 2000 17:48:52 -0400

I'm assuming my Portmaster25 is the NAS. I don not see a min time out
anywhere in the Portmaster settings. The admin guide for the Portmaster
does say that I can use the Radius Session-Timeout attribute. I set
this as high as 600 but it will still not shut the session down. Any
suggestions?

..
Dave Palazola
The Gloucester Internet Connection ( TGIC )
186 Main Street
Gloucester, MA. 01930
phone: (978) 282-5150

----- Original Message -----
From: "Dale E. Reed Jr." <daler@iea-software.com>
To: <ntisp@iea-software.com>
Sent: Thursday, May 25, 2000 2:16 PM
Subject: Re: [NTISP] Radius session limits

> "Dave P." wrote:
> >
> > Added Session-Timeout = 60 to test the line, reset radius, dialed
in,
> > but it was still active after 3 minutes. Is something else missing?
I am
> > not using Ascend.
>
> Some NASes have a minimum session timeout, and will ignore it if it to
> low. Try 200 or so and see if you get knocked off.
>
> --
>
> Dale E. Reed Jr. Emerald and RadiusNT/X
> __________________________________________
> IEA Software, Inc. www.iea-software.com
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
>

For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart