Re: [NTISP] Radius nt emergency

Dave P. ( (no email) )
Sat, 11 Dec 1999 21:46:44 -0500

IP address and Secrets have been compared and confirmed. Here is a copy
of one of the log items:
Sat Dec 11 21:31:43 1999
NAS-IP-Address = 209.213.72.21
NAS-Port = 192
NAS-Port-Type = Async
Accr-Status-Type = Stop
Acct-Delay-Time = 0
Acct-Session-Id = "309238398"
Ascend-Disconnect-Cause = 45
Ascend-Connect-Progress = 200
Ascend-Data-Rate = 24000
Ascend-PreSession-Time = 52
Ascend-Pre-Input-Octets = 336
Ascend-Pre-Output-Octets = 1616
Ascend-Pre-Input-Packets = 16
Ascend-Pre-Output-Packets = 6
Caller-Id = "*************"
Nas-Port-DNIS = "************"

*********** are customer and provider dialup phone numbers.

Dave

-----Original Message-----
From: WayneG <wayneg@uplogon.com>
To: ntisp@iea-software.com <ntisp@iea-software.com>
Date: Saturday, December 11, 1999 8:29 PM
Subject: Re: [NTISP] Radius nt emergency

>Is the IP address they gave you still "alive"?
>Also, are you receiving errors in your Radius RadLog?
>Bad Digest errors probably mean the secrets are wrong.
>
>-----Original Message-----
>From: Dave P. <dave@tgic.net>
>To: ntisp@iea-software.com <ntisp@iea-software.com>
>Date: Saturday, December 11, 1999 7:49 PM
>Subject: Re: [NTISP] Radius nt emergency
>
>
>>I believe, the comm servers. They are using my radius to authenticate
>>my customers. I put an IP address they supplied, into my radius
client
>>file and every thing was fine until 4pm today.
>>
>>-----Original Message-----
>>From: WayneG <wayneg@uplogon.com>
>>To: ntisp@iea-software.com <ntisp@iea-software.com>
>>Date: Saturday, December 11, 1999 8:15 PM
>>Subject: Re: [NTISP] Radius nt emergency
>>
>>
>>>Which servers were upgraded? Comm servers for the modem pool, radius
>>>server?
>>>
>>>-----Original Message-----
>>>From: Dave P. <dave@tgic.net>
>>>To: ntisp <ntisp@iea-software.com>
>>>Date: Saturday, December 11, 1999 7:26 PM
>>>Subject: [NTISP] Radius nt emergency
>>>
>>>
>>>>Is IEA's radius NT RFC compliant? I an running version 2.5. I have
a
>>>>modem pool for my 56K lines thru my T1 Supplier. I am a small ISP.
>>>>They upgraded some of their servers tonite and now my customers
can't
>>>>log onto the 56K lines. My ISP is telling me that it's because of a
>>>>problem with the brand of Radius NT I am using. It's supposed to be
>>RFC
>>>>compliant. They are telling me, they don't believe that IEA's
Radius
>>NT
>>>>is RFC compliant. Need help asap. Thanks
>>>>
>>>>
>>>>.
>>>>Dave Palazola
>>>>The Gloucester Internet Connection ( TGIC )
>>>>186 Main Street
>>>>Gloucester, MA. 01930
>>>>phone: 282-5150
>>>>
>>>>
>>>>
>>>>For more information about this list (including removal) go to:
>>>>http://www.iea-software.com/support/maillists/liststart
>>>
>>>
>>>For more information about this list (including removal) go to:
>>>http://www.iea-software.com/support/maillists/liststart
>>
>>
>>For more information about this list (including removal) go to:
>>http://www.iea-software.com/support/maillists/liststart
>
>
>For more information about this list (including removal) go to:
>http://www.iea-software.com/support/maillists/liststart

For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart