** -----Original Message-----
** From: radiusnt-request@iea-software.com
** [mailto:radiusnt-request@iea-software.com]On Behalf Of Josh Hillman
** Sent: Tuesday, April 18, 2000 9:30 AM
** To: radiusnt@iea-software.com
** Subject: Re: [RadiusNT] MLPPP / RadiusNT / Ascend MAX TNT
**
**
** Do you have "Shared Profiles" enabled in the MAX? I don't know if a TNT
** works the same way as the 40xx series does, but in the 40xx
** series, you have
** to turn that on so that the radius settings can override what the MAX
** defaults are. In the MAX 40xx series, this is at:
** Ethernet --> Mod Config --> Shared Prof=Yes
**
** Josh
**
** From: Clara Hatem <clara@inco.com.lb>
** > Yes I have it turned on
** >
** > Thank you
** > Clara
** >
** > At 10:51 AM 4/14/00 -0400, you wrote:
** > >Make sure you have 'Variable login limits' is turned on. Ihad the same
** > >problem.
** > >
** > >-----Original Message-----
** > >From: Clara Hatem [mailto:clara@inco.com.lb]
** > >Sent: Friday, April 14, 2000 10:32 AM
** > >To: radiusnt@iea-software.com
** > >Subject: [RadiusNT] MLPPP / RadiusNT / Ascend MAX TNT
** > >
** > >
** > >Hello,
** > >
** > >We need to offer Multi Link PPP dial up connections to our customers.
** > >
** > >We are running Emerald, and Radius NT version 2.5.206
** > >
** > >I have configured the user (clarah) with the following attributes
** > >Framed-Protocol = MPP
** > >User-Service = Framed-User
** > >Idle Timeout = 900 seconds
** > >Login Limit = 2
** > >
** > >I am using DUN on a win95 station with DUN 1.3 Update (to support MLPPP)
** > >
** > >And establishing a connection to an Ascend MAX TNT Access server.
** > >
** > >The problem is that the first connection is established , but the second
** > >connection drops at authentication. No entries show in the RadLog.
** > >
** > >We have extracted debug entries from the MAX TNT :
** > >(The 2nd MPP session is being authenticated by Radius, but the
** accounting
** > >records are somehow incorrect, triggering the disconnection. I noticed
** that
** > >accouting record type 0 does not show) ; The username used is clarah.
** > >
** > >Unsuccessful 2nd MPP Session Attempt
** >
** >------------------------------------------------------------------
** ---------
** > >RADIF: radius type Auth ID = 75
** > >RADIF: authenticating <6:clarah> with CHAP
** > >RADIF: _radiusRequest: id 75, user name <7:clarah>
** > >RADIF: _radiusReq: challenge len = <0>
** > >RADIF: _radiusReq: socket 2 len 104 ipaddr 192.168.168.2 port 1678->1645
** > >RADIF:_radiusReq: id 75 <7:clarah>, starting timer (10 sec)
** > >RADIF: _radCallback: buf=101ECF90 from 192.168.168.2 1645
** > >RADIF: _radCallback, authcode = 2, id 75
** > >RADIF: _radCallback: id 75, killing timer
** > >RADIF: Authentication Ack
** > >RADIF: attribute 7, len 6, 00 00 01 00
** > >RADIF: attribute 28, len 6, 00 00 03 84
** > >RADIF: attribute 6, len 6, 00 00 00 02
** > >RADIF: attribute 27, len 6, 2a ae 14 40
** > >RADIF:_freeInfoClassSess
** > >
** > >Accounting Record
** >
** >------------------------------------------------------------------
** ---------
** -
** > >
** > >RADIF: radius type Acct ID = 72 (<--- Following this there should be a
** type
** > >0
** > > AcctRequest ?? it is missing ...)
** > >RADIF: _radiusAcctRequest: type 1 id 72, user name <0:> (<---
** Note blank
** > >user)
** > >RADIF: _radiusAcctReq: socket 4 len 134 IP 194.126.5.8 port 1800=>1646,
** > >ID=72
** > >RADIF: _radCallback: buf=101EB5D0 from 194.126.5.8 1646
** > >RADIF: _radProcAcctRsp: user:<0:>, ID=72
** > >RADIF:_freeInfoClassSess
** > >RADIF: _radCallback: processed acct server type=1 (<--- Acctg Stop
** Record.)
** > >
** > >
** > >
** > >Any help is appreciated.
** > >
** > >Thank you,
** > >Clara
**
**
**
** For more information about this list (including removal) go to:
** http://www.iea-software.com/support/maillists/liststart
**
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart