-----Original Message-----
From: Michael Saunders [mailto:mick@tsn.cc]
Sent: Monday, February 14, 2000 3:59 PM
To: radiusnt@iea-software.com
Subject: Re: [RadiusNT] RadiusNT Crashes
Have you ever tried not authenticating customers for 30 seconds.
Not intending to be slack but I would hate to work on your help desk if
you just stopped authenticating for 30 seconds or so.
So I just stick to debug mode because it doesnt stop
Michael Saunders
----- Original Message -----
From: "Nathan Haywood" <nhaywood@whro.org>
To: <radiusnt@iea-software.com>
Sent: Tuesday, February 15, 2000 7:26 AM
Subject: RE: [RadiusNT] RadiusNT Crashes
> For anyone doing something like this, that is basically what RadCheck
does.
> It loads as a service and restarts the RadiusNT service anytime it stops
> (with less than one minute turn around time...)
>
> ftp://ftp.iea-software.com/RadiusNT/updates/radcheck.zip
>
> -----Original Message-----
> From: Bob's Lists [mailto:bob.lists@raha.com]
> Sent: Monday, February 14, 2000 3:23 PM
> To: radiusnt@iea-software.com
> Subject: RE: [RadiusNT] RadiusNT Crashes
>
>
> Add another one to that list...
>
> I have a script running, that does a 'net start radius' every 1 minute -
if
> it's running the command's ignored, if it's not it restarts it...
>
> Thought it was just me...
>
> Hello... earth to IEA... we seem to have a problem here... ;-)
>
> Regards
>
> Bob
>
> > -----Original Message-----
> > From: radiusnt-request@iea-software.com
> > [mailto:radiusnt-request@iea-software.com]On Behalf Of Michael Saunders
> > Sent: Monday, February 14, 2000 10:43 PM
> > To: radiusnt@iea-software.com
> > Subject: Re: [RadiusNT] RadiusNT Crashes
> >
> >
> > Yep I have the same problem as well. We have to radius NT in debug mode
> >
> >
> > Michael Saunders
> > ----- Original Message -----
> > From: "Nathan Haywood" <nhaywood@whro.org>
> > To: <radiusnt@iea-software.com>
> > Sent: Tuesday, February 15, 2000 5:22 AM
> > Subject: RE: [RadiusNT] RadiusNT Crashes
> >
> >
> > > We've had the same problem under 2.5 and 3.0. Right now, we're running
> > > RadCheck to keep Radius running while we wait for someone to get back
to
> > us.
> > >
> > > -----Original Message-----
> > > From: Greg White [mailto:GWhite@bctelco.com]
> > > Sent: Monday, February 14, 2000 1:06 PM
> > > To: 'radiusnt@iea-software.com'
> > > Subject: RE: [RadiusNT] RadiusNT Crashes
> > >
> > >
> > > We, too, have been having this problem. The only way we have
> > been able to
> > > keep Radius running is by running it in debug mode. We are currently
> > > running version 3.0.147, using SNMP concurrency checking, but
> > no proxying.
> > >
> > >
> > > Thank you,
> > >
> > > Greg White
> > > Internet Network Administrator
> > > Beaver Creek Cooperative Telephone Company
> > >
> > >
> > > >-----Original Message-----
> > > >From: Chris Kissinger [mailto:chris@aci.net]
> > > >Sent: Monday, February 14, 2000 10:03 AM
> > > >To: radiusnt@iea-software.com
> > > >Subject: RE: [RadiusNT] RadiusNT Crashes
> > > >
> > > >
> > > >We are having the same problems with radius. It started when we went
to
> > > >Enterprise version and enabled user proxy using 2.5.x we are now
using
> > > >3.0.162 and are still having the same problem. Engineering at iea is
> > > >looking at Dr. Watson and debug logs.
> > > >
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: Carlos J Salas [mailto:cjsalas@centennialpr.com]
> > > > Sent: Monday, February 14, 2000 5:28 AM
> > > > To: radiusnt@iea-software.com
> > > > Subject: [RadiusNT] RadiusNT Crashes
> > > >
> > > > I have RadiusNT installed and running. During a the
> > > >week it crashes like 4
> > > > to 5 times with error 0xc0000005. We just Start the
> > > >service again, and it
> > > > may run for 2-3 days or it may just run for 2-3 hours.
> > > >Does anyone has had
> > > > the same problem? How can we fix this?
> > > >
> > > > On another note, I'm trying to activate User Proxy in
> > > >the RadiusNT Admin,
> > > > but when I choose User Proxy with the sub-tabs
> > > >Authentication and Accounting
> > > > selected, I save the configuration and when I go back to
> > > >check the
> > > > configuration, only User Proxy is selected but the
> > > >sub-tabs (Authentication
> > > > and Accounting) is not selected. What could this be?
> > > >
> > > > Carlos J Salas
> > > >
> > > >
> > > > For more information about this list (including removal)
> > > >go to:
> > > > http://www.iea-software.com/support/maillists/liststart
> > > >
> > > >For more information about this list (including removal) go to:
> > > >http://www.iea-software.com/support/maillists/liststart
> > > >
> > >
> > > For more information about this list (including removal) go to:
> > > http://www.iea-software.com/support/maillists/liststart
> > >
> > > For more information about this list (including removal) go to:
> > > http://www.iea-software.com/support/maillists/liststart
> >
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
>
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart