<PPP-Answer> is within <Answer-defaults>
Check the <recieve-auth-mode>
I think that the most basic is:
recieve-auth-mode=pap-ppp-auth
or you can set for pap and chap:
recieve-auth-mode=both-ppp-auth
I dont recall an option that would force a terminal window...but you might
check to see if you have something weird in there.
Mj
----- Original Message -----
From: Terry Bomersbach <terryb@the-cia.net>
To: <radiusnt@iea-software.com>
Sent: Wednesday, January 26, 2000 10:46 AM
Subject: Re: [RadiusNT] MAX TNT problem
> Dunno if the TNT is like the lil brother MAX but in the Max under Ethernet
>
> Answer > PPP Options you need to specify the login type as PAP, CHAP,
Either
> or None.
>
> -----Original Message-----
> From: Josh Hillman <admin-maillist@talstar.com>
> To: radiusnt@iea-software.com <radiusnt@iea-software.com>
> Date: Wednesday, January 26, 2000 10:44 AM
> Subject: Re: [RadiusNT] MAX TNT problem
>
>
> >From: Kurt Schafer <kahuna@cyberbeach.net>
> >> Some users dialing in to our newly installed TNT are getting a Ascend
> >Terminal Server Login prompt instead of authenticating via PAP.
> >>
> >> Their usernames/passwords aren't working in this situation. Is it
> >something I need to change in the TNT or am I missing something in
RadiusNT
> >?
> >
> >It sounds to me like those users have a terminal window opening up after
> >dialing.
> >Assuming they're using Windows 95/98, have them check the following:
> >Go into Dial-Up Networking
> >Right-click on the connection and choose properties.
> >Click on Configure
> >Click on the Options tab
> >DEselect anything that mentions terminal windows.
> >For that matter, disable any login scripts the people might be using too.
> >
> >I don't know where the stuff is in a TNT, but there are some settings in
> our
> >40xx units that may correspond to what you're talking about:
> > Ethernet --> Mod Config --> TServ Options
> >
> >Josh
> >
> >
> >For more information about this list (including removal) go to:
> >http://www.iea-software.com/support/maillists/liststart
> >
>
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart