[RadiusNT] .209 and VSA

Herman verschooten ( (no email) )
Sun, 9 Jan 2000 14:22:07 +0100

Hi,
I must be doing something wrong, because VSA's do not seem to work for
me. Is there a switch somewhere you have to turn on to make them work?
I have the RadAttributes-table with an entry for our Cisco AS5300.
Attribute 26, Vendor 9, VendorType 1, String. What I get back in the
accounting-record is what you can find below. It's the output of an
adapted version of the perl radlogin-script. The values are just for
testing. If you look at the packet, you'll see that it does send back
the attribute 26 (1a), the length 12 (c), the vendor 9, but no data...
The radius-specs say it should contain

attr: name (6) =3DUser-Service value=3DFramed-User
attr: name (7) =3DFramed-Protocol value=3DXylogics
attr: name (10) =3DFramed-Routing value=3DBroadcast-Listen
attr: name (12) =3DFramed-MTU value=3D1500
attr: name (13) =3DFramed-Compression value=3DVan-Jacobsen-TCP-IP
attr: name (18) =3DReply-Message value=3Dtest
attr: name (26) =3DVendor-Specific value=3D

Packet:
2 75 0 3e 68 6b 79 77=20
8b 9e 30 ee 61 cf c3 cd=20
7 44 ad d0 6 6 0 0=20
0 2 7 6 0 0 0 5=20
a 6 0 0 0 3 c 6=20
0 0 5 dc d 6 0 0=20
0 1 12 6 74 65 73 74=20
1a c 0 0 0 9=20

Type=3D2 ID=3D117 Length=3D62
Auth=3D68 6b 79 77 8b 9e 30 ee=20
61 cf c3 cd 7 44 ad d0=20
=20
Attributes=3D
6 6 0 0 0 2 7 6=20
0 0 0 5 a 6 0 0=20
0 3 c 6 0 0 5 dc=20
d 6 0 0 0 1 12 6=20
74 65 73 74 1a c 0 0=20
0 9=20

For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart