What would be the standard Attributes for static IP and a framed route for a
full class c for a dial in 64k ISDN user.
~~~~~~~~~~~~~~~~~~~~~~~~~~
Don Barron
World-Link Internet
Email: don@world-link.com.au
Web: http://www.world-link.com.au
Thought of the Day:
NEWS! Iraqi head seeks arms
~~~~~~~~~~~~~~~~~~~~~~~~~~
----- Original Message -----
From: Josh Hillman <admin-maillist@talstar.com>
To: <emerald@iea-software.com>
Sent: Wednesday, 1 December 1999 4:42
Subject: Re: [Emerald] Radius Attributes, Static IP
> From: PowerNet <psc5@powersupply.net>
> Is that it?
> Is that why it's not working since I don't have that?
> Would it be 255.255.255.0 for 1 class C
>
> Only if you're routing an entire class C through them.
>
> Here are the radius defaults for one of our users with a static IP (not
> doing any subnetting) and is also allowed to be on 24/7--that's why
> Ascend-Maximum-Time is not listed for him. Ascend-Idle-Limit is set
because
> I have it set in our Maxes as 20 minutes by default. The one in radius
> overrides the Max setting because I have "shared profiles" enabled in the
> Maxes.
>
> Name Data
> ---------------------- ----------------------
> Ascend-Idle-Limit 0
> Framed-Address 123.123.123.123
> Framed-Netmask 255.255.255.255
> Framed-Protocol PPP
> NAS-Port-Type Async (prevent ISDN)
> User-Service Framed-User
>
>
> Josh
>
> *********** REPLY SEPARATOR ***********
>
> On 11/30/99, at 12:21 PM, Josh Hillman wrote:
>
> >Don't forget FramedNetmask=255.255.255.255
> >
> >----- Original Message -----
> >From: PowerNet <psc5@powersupply.net>
> >To: <emerald@iea-software.com>
> >Sent: Tuesday, November 30, 1999 11:59 AM
> >Subject: [Emerald] Radius Attributes, Static IP
> >
> >
> >I have a couple customers with Static IP's
> >I am using Ascend boxes with Emerald and RadiusNT
> >
> >Currently, for dedicated 24/7 customers we have a dedicated account with
> >radius attributes set up in emeraldadmin
> >The attributes are:
> >User Service Framed User
> >Framed Protocol PPP
> >
> >That it, and nothing special is set up in Emer Client for that specific
> >user.
> >The way they get that ip is that we have them specify the ip in their
> dialup
> >network settings. It works that way.
> >
> >This morning I tried to set the address in the radius section of Emer
> >client and then when they logged in I can't ping them and their
connection
> >does not work. The settings I made this morning were:
> >User Service Framed User
> >Framed Protocol PPP
> >Framed Address x.x.x.x(x=their static ip)
> >
> >What am I doing wrong that this won't work. From what I have been told
> this
> >is the way to set it up.
> >
> >Thanks,
> >John
> >
> >
> >For more information about this list (including removal) go to:
> >http://www.iea-software.com/support/maillists/liststart
> >
> >
> >
> >For more information about this list (including removal) go to:
> >http://www.iea-software.com/support/maillists/liststart
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
>
>
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart