[Emerald] Multilink ISDN

David V. Brenner ( (no email) )
Mon, 15 Nov 1999 12:52:55 -0800

This is a multi-part message in MIME format.

------=_NextPart_000_000F_01BF2F68.561F9D80
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Hi, folks. We've just installed our first ISDN (BRI) circuits and I'd like
to verify that the following RADIUS entries will work in allowing callers
the following:

1. Dynamic IP address as per PM2e assigned pool
2. Idle time-out of 30 minutes
3. Maximum session length of 8 hours
4. Single channel or bonded session

Here are the attributes:

User-Service = Framed-User
Framed-Protocol = MPP
Session-Timeout = 28800
Idle-Timeout = 1800
NAS-Port-Type = ISDN
Port-Limit = 2

In MBR -> Services:

Login Limit = 2

Will this work or do I need anything else?
___________________________________
David V. Brenner - dvb@cport.com
International Services Network Corporation
http://www.cport.com

------=_NextPart_000_000F_01BF2F68.561F9D80
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">

Hi,=20folks.  We've just installed our first ISDN (BRI) circuits and I'd =like to=20verify that the following RADIUS entries will work in allowing callers =the=20following:
 
1.=20Dynamic IP address as per PM2e assigned pool
2.=20Idle time-out of 30 minutes
3.=20Maximum session length of 8 hours
4.=20Single channel or bonded session
 
Here=20are the attributes:
 
    User-Service =3D=20Framed-User
    Framed-Protocol =3D=20MPP
    Session-Timeout =3D=2028800
    Idle-Timeout =3D=201800
    NAS-Port-Type =3D=20ISDN
    Port-Limit =3D =2
 
In MBR=20-> Services:
 
    Login Limit =3D =2
 
Will=20this work or do I need anything else?

___________________________________
David V. =Brenner -=20dvb@cport.com
International Services Network Corporation
http://www.cport.com

 

------=_NextPart_000_000F_01BF2F68.561F9D80--