Date: Wed, 20 Aug 2003 08:55:34 -0700 (Pacific Daylight Time) From: Peter Deacon <peterd@iea-software.com> Subject: Re: [RadiusNT] Radlogin web test client differs from old radlogin.exe and does not show returning FramedAddress attribute Message-ID: <Pine.WNT.4.56.0308200844400.352@smurf>
On Wed, 20 Aug 2003, Serkan SUBASI wrote:
> Hi,
> ******** this one is Radlogin test client (196 KB (200704 bytes)) *******
*****
> 20/08/2003 14:04:05.53 C:\radius>radlogin sstest XXXXXXX
>
> Checking Radius user sstest:
>
> [Standard] Session-Timeout = 3600
> [Standard] User-Service = Framed-User
> [Standard] Framed-Protocol = PPP
> [Standard] Idle-Timeout = 900
> [Ascend] Ascend-Maximum-Time = 10800
> [Ascend] Ascend-Idle-Limit = 900
> [Standard] Class = "IEAS1\00122\003102"
>
> Good: 1 Bad: 0 T/O: 0 Avg: 110
I'm pretty fond of our new radlogin client :)
If I had to guess the reason its not showing Framed-Address is simply
because one is not being returned in the response. Most likely due to the
difference in request attributes between the two versions.
If you configured the 'default profile' under settings to be something
other than '[None]' then you need to make sure you add some form of
NAS-Identifier to that profile. The IP Pooling procedure won't fire
without some form of NAS-ID/IP.
take care,
Peter
> 20/08/2003 14:04:13.50 C:\radius>cd\radlogin
>
> *********
>
> ******** this one is old Radlogin.exe (72.0 KB (73728 bytes)) ***********
*
> 20/08/2003 14:04:18.22 C:\radlogin>radlogin sstest XXXXXXX
>
> Checking Radius user sstest:
> Session-Timeout = 3600
> User-Service = Framed-User
> Framed-Protocol = PPP
> Idle-Timeout = 900
> Vendor-Specific = "529" "194" "\000\000*0"
> Vendor-Specific = "529" "244" "\000\000\003ä"
> Framed-Address = 195.214.145.88
> Class = "IEAS1\00122\003107"
>
>
>
> Good: 1 Bad: 0 T/O: 0 Avg: 31
>
> 20/08/2003 14:04:19.78 C:\radlogin>
> *****************************************************
>
> kindest regards
>
> Serkan SUBASI
>
> Turk Nokta Net
> SABANCI CENTER
> HOLDING TOWER 2B
> 34330 4.LEVENT/ISTANBUL/TURKEY
> (Time Zone: GMT +02:00)
> Phone : + 90 (212) 340 4015 (Direct)
> Fax : + 90 (212) 284 2366
>
> ------------
>
> This is a user supported list. If you require assistance from IEA Softwar
e's
> Support Engineers, please check out our Support resources at
> http://www.iea-software.com/support.
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
>
>