One problem to consider is that if you lose the signalling on the first
PRI then both are effectively down. The second D channel would allow for
some inherent redundancy.
-Kevin
-----Original Message-----
From: Info Desk <info@olynet.com>
To: ntisp@iea-software.com <ntisp@iea-software.com>
Cc: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: Monday, June 21, 1999 9:12 PM
Subject: [NTISP] USR Hiper DSP
>If you have two PRI circuits can you have one at 24 channels and the
>other 23b's and 1d mark? Or do you have to have each line at 23b's and
>1d mark. I am running them on the USR Hiper DSP cards.
>
>